How do I connect my gas stove to gas wall tube?

+3
Answered

We are updating a fixer/upper and we are trying to install electric/gas stove in basement. Plumber didn’ Tell me how to connect the two. Help!?

q how do i connect my gas stove to gas wall tube

Tube attached to stove.

q how do i connect my gas stove to gas wall tube

New tube in wall attached to gas service to house.

  6 answers
  • Heje Heje on Sep 04, 2018

    Talk to the gas company about a safe installation. It looks like you will have an opportunity to clean up the area with the stove not in yet.

  • Kathy Gunter Law Kathy Gunter Law on Sep 04, 2018

    You probably need a regulator installed. I agree with above, check wtih the gas company.


  • Cynthia H Cynthia H on Sep 04, 2018

    Hi Rebecca! The gas company usually requires installation by a professional. Contact them to confirm this. This is not a DIY project. You may be able to get referrals from them or the place you bought the stove.

  • Lifestyles Homes Lifestyles Homes on Sep 04, 2018

    Do you have a new shut-off valve and new supply line kit? If your plumber didn’t install a shut-off valve you’ll need one first.

  • William William on Sep 05, 2018

    I agree. Gas is not something to play with. Call the gas company and they'll advise you what needs to be done and may even do it for you.

  • Kenneth Gauthier Kenneth Gauthier on May 26, 2020

    Gas analyzers https://axonim.com/works/gas-analyzer.html work on the principle of absorption of light by the gas under test. Absorption analyzers need only shine a beam of light through an unheated sample chamber, then measure how much of specific wavelengths were absorbed by the sample. The amount of light absorbed is proportional to the concentration of the component in the fluid which absorbed light