How do I fix my dishwasher?


I cleaned the inside pushed the button to start and drain , will not do anything. Just like a faint sound. What could be wrong ? Only 4 years old. Thank you , Nadina

  8 answers
  • Tinyshoes Tinyshoes on Nov 11, 2018

    Nadina...Was there a lot of water in it after cleaning...maybe you need to put on drain or rinse to start ???????????????

  • Kc Kc on Nov 11, 2018

    If the water level is too high it may have triggered a shut down mode to prevent overflow. Try bailing out some of the water before starting the drain cycle again.

    • Nadina Nadina on Nov 13, 2018

      I took all the water out. Pushed the button , still nothing

  • Oliva Oliva on Nov 11, 2018

    Drain as much water as possible, using a turkey baster or a child's large water blaster toy, then try restarting on short cycle with a few items inside.

    While cleaning, you may have clogged the food strainers. Check to insure they are free of all residue.

    • Nadina Nadina on Nov 13, 2018

      I cleaned everything. drained the water and pushed the button again to drain , nothing.

  • Nadina Nadina on Nov 11, 2018

    So , I cleaned the filter ,checked the float,I even shut the breaker off to try and reset. Still nothing .

  • Oliva Oliva on Nov 11, 2018

    Hi, Nadina,

    Check out the Family Handyman website, which will show you various options to look at. There are also variety of videos, some posted by appliance companies.

  • Kc Kc on Nov 13, 2018 this is a total WAG idea....since you haven't used it for a few months, is it possible the drain hose clogged up with something? Can you disconnect it at the sink side and try shaking it out? ...or just feel it heavy like water is trapped in it?

  • Oliva Oliva on Nov 14, 2018

    Hi, Nadina,

    Did you have any luck?

    You may be forced to have a service call. Since it makes a faint noise, I wonder if something is wrong with a solenoid? Today's machines can be more complicated than those of 25 years ago.

    Please let us know how you remedy this.

  • Lynn Sorrell Lynn Sorrell on Nov 14, 2018

    Check manual for any type of reset options. Something like this "reboot" Video???kinda silly but may help