by Bil29192973
How do you remove a broken bolt from a piece of equipment?
+3
5 answers
-
![Molly Anmar]()
Molly Anmar
on Dec 18, 2017
https://www.youtube.com/watch?v=_R1b8niX13w![]()
-
![Jewellmartin]()
Jewellmartin
on Dec 18, 2017
Billysutton, I was hoping there was a photo, but I have two suggestions. If the bolt has any part sticking out, lay a piece of flexible material like a dishwashing glove or a couple of layers of plastic wrap over the bolt end. Then use pliers to unscrew or pull the bolt out, with increased grip. If the bolt end is smooth or recessed, use a hammer and another bolt, a short piece of rebar, or something else strong and cylindrical, to knock the bolt all the way through to the other side, or far enough that you can use a vice grip to pull the bolt from the back side. Best wishes 😇 -
![Mary]()
Mary
on Dec 18, 2017
the tool you need is an easy out just need to know the size of your bolt to tell the hardware man and he'll set you up -
![Marion Nesbitt]()
Marion Nesbitt
on Dec 18, 2017
Could try drilling it out. -
![Kitty]()
Kitty
on Dec 19, 2017
Try naval jelly. You can find it at boating supply shops and it's for getting through rust.
Molly Anmar
on Dec 18, 2017
Jewellmartin
on Dec 18, 2017
Sign Up to Answer
Suggested Project Book
