Is it normal for a tile floor to be higher than bordering the wood flooring? If so is there a type of transitional piece
-
3po3 on Jun 15, 2012I don't know how normal it is, but I have certainly seen that before. The big box stores carry all kinds of transition strips that should fit your needs.Helpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Jun 15, 2012Yes its quite common to see tile floors a bit higher then the surrounding floor levels. And yes there are several methods to blend this together. Sometimes its done with metal edge and sometimes with wood boards stained or painted to match the floor. We use marble saddles when we do this. It gives the tile a stop point that blends the tile to the wood.Helpful Reply
-
-
KMS Woodworks on Jun 16, 2012When I do some tile installs.... Instead of 1/2" backer I will use 1/4" backer....this combined with normal full thickness 3/4" flooring results is a pretty even surface.Helpful Reply
-
-
Leslie D on Jun 17, 2012We changed flooring for several areas in our house, adding wood to tile, and tile to different type tile. I don't care for the traditional transition strips, so we used a decorative tile to make our own transitions. The decorate tile is typically thinner than tile/wood, and we were able to build up the thinset to make the transition flush with each type of flooring used. I wouldn't suggest this if the height difference is too severe, but for small differences in height, it works great and you can't feel the slight slope at all when walking on it. Of course, this is more easily done if you plan for it prior to laying both floors. This is a picture of our ceramic tile to slate transition and the ceramic tile to wood transition we used. We just chose a decorative tile that matched everything we were using, which was the most difficult challenge.Helpful Reply
-
-
Baby H on Jun 17, 2012thats lovely Leslie. The floor was already down and I didn't really notice it till I moved in and keep tripping so I'm not sure what it would involve to stick something inbetween the wood and tile floor..I will keep this in mind when doing the basement though! ThanksHelpful Reply
-
Related Discussions
Best product for sealing very porous tile?
Hi fellow home talkers! How are all of you doing? If anyone could help me out...I would really appreciate it! We have a very porous PORCELAIN tile in our kitchen. ... See more
How do I remove vinyl tile adhesive that has leaked thru the seams?
These vinyl tiles have been our floors in our vacation retreat house for a few years. It began happening within a few weeks after installation. Of course we complaine... See more
I tiled my floors and there are small gaps between tiles how can I fix
How do I fill gaps in vinyl tile??
We have some vinyl tiles on our bathroom floor that have a few gaps. We have tried using some caulking but that didn't work very well. Any suggestions on what else we... See more
How to re-tile shower floor?
The tiles are coming off the floor of this shower floor. It was built in the ‘70’s. I really would like to replace so it can be SCRUBBED REALLY GOOD! How difficu... See more
How do I paint ugly tile in my laundry room?
The tile is a white yellow tile which previous owner cemented it down. It can not be torn out without ripping up floor bottom. Can ceramic tile be painted and withsta... See more
What’s to be done when ceramic tile has been improperly installed ?
What options do I have with improperly installed ceramic tile flooring -throughout my entire home? The work is so poorly done that I cannot walk barefoot anywhere. ... See more