How to trim around exterior windows?

Hi Linda, here's a great video that will show you how - https://www.youtube.com/watch?v=cibMptF-F_g

Don't forget the flashing - Here's a link:

http://diydiva.net/2010/09/diy-house-addition-how-to-properly-flash-trim-windows/

Here's some trim suggestions:

https://belcofp.com/exterior-window-trim-ideas/

Or do you mean paint the trim around exterior windows?

https://www.behr.com/consumer/how-to/exterior/application/how-to-paint-trim-fascia-and-door

Trim as in paint? Or trim to look nice?

Hello. This link could be helpful.

https://youtu.be/qjbL7tERcLs

You need a good miter saw and cut the pieces at a 45 degree angle. Then nail into place. If you want to go with a farmhouse look you can use 1x4 or 1x6 and not cut on an angle. Placing the board window length on each side first then adding top & bottom pieces the width of the window plus the 2 boards.

Usually they use via Lori aluminum to trim around windows

here's a good tutorial to get you started: http://www.frugalwoods.com/2014/07/30/how-to-replace-exterior-window-trim/

You can try watching this https://m.youtube.com/watch?v=cibMptF-F_g, this may help you out.

This is practically an art form, it's not as easy as it looks! Be sure to do some practice tests before cutting the real material and study up before attempting.

Are the windows brand new, having just been installed, or are they old windows? Please post a picture of your windows so that we can see what you have to work with?

This shows how to trim around exterior windows: https://www.youtube.com/watch?v=tZso1rwct1c