Hello everyone, I've heard alot of good things about this site.
-
Woodbridge Environmental Tiptophouse.com on Dec 13, 2011Welcome Mike, Ideally putting down even just a thin layer of thin-set on the floor before you put the Hardi-Backer down helps. What it does is helps prevent any movement by gluing down the boards. It also helps level any low spots that can weaken the cement boards. Also by using the cement thin set with fiberglass tape on the joints makes the floor much stronger and helps prevent any side to side movement should the wood floor swell or shrink with the weather. Another way to do this is if your floor is thick enough, and you know for sure that there is no flex in it between the joists. You can put down a uncoupling layer such as Schluter Detria Mat. Here are the directions on how to use this product. http://www.schluter.com/media/DitraHandbook.pdf Yes there are advantages of doing it the way the manufacture suggests. Its is the right way to do this and it will assure you that if you follow their directions that you should have successful results that will last a lifetime.Helpful Reply
-
-
KMS Woodworks on Dec 14, 2011If you are "mating" this tile surface to a normal hardwood floor in some other room the use of 1/4 backer set in mastic / thinset will bring the final tile height to that of the standard 3/4" thick hardwood. by setting the backer you greatly reduce the chance of flex...which is tiles "Achilles heel". If I am laying a very large floor I will often set the backer with mastic and use my "roofing" nail gun to nail it off. This is tons faster than screwing it down. For small jobs I often screw it down...as hauling the compressor in the truck sometime requires extra trips when the tile saw and equipment are loaded. Taping and mudding seams helps with minor tile leveling issues tooHelpful Reply
-
-
Straight Nails Construction on Dec 14, 2011I just added thin set to the backerboard before screwing to the floor... this was a great addition that will add to the quality of work.Helpful Reply
-
Related Discussions
How can I remove labels from coffee cans so I can upcycle them?
How can i keep neighbors small children from climbing my fence?
I have a 20 year old chain link fence set back on my property by almost a foot. The neighbors small children keep climbing it. I have talked to the dad and he doesn't... See more
How to get rid of bugs on raspberry bush without pesticide?
How can i upcycle rigid foam packing blocks?
how can i upcycle rigid foam packing blocks?
How do I get rid of moles, voles and chipmunks?
They dig holes, have tunnels and throw dirt all over. how can I get rid of chipmunks, voles, and moles with natural easy to find ingredients?
How to remove Behr Deckover?
We used Bher Deck over about 5 years ago. It is peeling and fading in places. We have tried to remove it. It is almost impossible. HELP!
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more