Distressing a bird cage
-
Nancy G on Jul 16, 2013Jan, Is it a wood bird cage or a metal one? I've done it with both kinds. Just paint (or spraypaint lightly) the undercolor & then go over it w/a different color. Last you take off some of the top color using sandpaper. Voila~ I've used the wooden one to put fake vines in & the metal one I put in clear colored Christmas lights. Hope this helps youHelpful Reply
-
-
Anita Roll Murals on Jul 18, 2013Jan, you can also add distressing with a sanding or wood block. Depending on the color of your cage apply either lighter or darker paint to one side of your block and lightly touch around on your cage in a skipping motion.Helpful Reply
-
-
Diana Blazer on Jul 18, 2013This has helped me too. I have two old birdcages and I want to distress them and put bird nests and lights in them. I painted one of them and it looks "too made up" so I thought the homemade chalk paint might work. I was going to redo the one, but I am just going to sand it down. Thank you for the great tip!Helpful Reply
-
-
Brenda Smith on Jul 18, 2013textured metal paint in a rusty color is a good start then a little sandingHelpful Reply
-
-
Jan Reiter on Jan 19, 2014Jan, can you tell me what kind of glue to use when wanting to glue glass to glass that will hold up outside, especially in ND and WY. Thanks a bunch?Helpful Reply
-
-
Jan Watson on Jan 20, 2014Bet thing that I used wasindoor outdoor clear calking, this has worked the best and I have tried everything! And, its a lot cheaper that other glass glue. But make sure the calking is for NON_PORIS surficesHelpful Reply
-
Related Discussions
How can I keep the area around my bird cages clean?
I have very pretty birds and they have large cages but they are making messes all over the floors! We have nets that are made for catching the mess around their cage ... See more
How to refurbish a wrought iron vintage bird cage?
I need suggestions on how to clean and refurbish an antique vintage bird cage so it will be safe for my African Grey parrot? My husband suggested to have it sandblas... See more
Slide out tray idea needed for bird cage
I have a bird cage that has no pull out tray. I measured the opening for the tray and it looks like 15 1/2 x 12 with maybe an inch or little more opening to slide in ... See more
Want to restore vintage bird cage.
I bought an old metal bird cage and would like to restore it and use it as a bird cage. Can anyone give advice on how to proceed?
I want to get rid of a trumpet vine that is growing on my home.
How do you get rid of Trumpet Vine. It is growing into the foundation of my house. I have tried pulling it out, round up, vinegar and salt. Please share your knowled... See more
How can you make a regular sized door fit into a mobile home frame?
The back door to my mobile home is a an odd size - specific to mobile homes. They are extraordinarily expensive. Is there some way to cut down a regular sized door to... See more
What can I do with this DVD stand?
I have a DVD stand that I am trying to repurpose instead of trash. Any ideas?