How to revitalize my my bathroom vanities?
I need to update my vanities, they are particle board and are peeling from the moisture in the bathrooms. Would sanding and painting be an option? What kind of paint would I use?
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
Why do I have sand in my bathtub?
I’m wondering if it’s just a clog of beach sand that keeps coming up or a bigger plumbing issue. I don’t want this to reoccur, so any information on why this ha... See more
How can I refinish my bathroom vanity without stripping?
My vanity has places where the finish is worn off from water splashes. The current finish is clear on oak and looks yellow. I do not want paint it but would like the... See more
Make sure they are clean and dry. Remove the doors and hardware. Mark the doors and cabinets with tape where they go. Lightly sand the doors and cabinets to remove any gloss and roughen the surface for paint with 220 grit sandpaper or a green Scotch Brite pad.. Use a tack cloth or damp rag to remove dust after sanding. Prime with a stain blocking primer like Zinsser 123, KILZ,or BIN and have it tinted to the color of the top coat. This will prevent dark or stained surfaces from showing through the top coat. Acrylic, or water base paints are low-fume and clean up easily with water. Alkyd, or oil-base, paints require good ventilation because the paint contains solvents that can irritate your lungs and make you feel sick. Alkyd options require mineral spirits for cleanup, but they provide a hard, durable paint finish. Whichever you use, buy the best-quality paint you can afford for a lasting kitchen cabinet finish. Seal with at least three coats with a water based polyurethane. Use a small foam roller and foam brush for a smooth finish.
Hi Debbra. Be careful sanding these if they are particle board. I would actually wipe them down with mineral spirits, then prime and paint. I just redid a desk that was particle board with chalk paint and it turned out very well. Good Luck!
Hi Debbra,
Yes you could paint them, but only after they are completely dry before you start. Sand, Prime, Undercoat and use Gloss paint. If you have water running to the back of the top - use a piece of angle and stick it to the seam. You could also Tile it or use Contact.
Enjoy the project!
I think chalk paint would work too, with a sealer on top. No fumes from chalk paint. Put it on over the Kilz.
It was my pleasure to try and help you...........