How to add ventilation to an 8x12 shed I use to work wood?
Would the best thing be to add a small window on the opposite wall as the door? Or should I put a window in one of the side walls or both? I have ridge vents but would a strong roof vent be better.
Related Discussions
How do I extend this door?
I have these wonderful old doors, they are the right width, too short. How do I make them work?
Closet doors for 95" tall opening
Hello everyone, I'm looking to update my closet doors to be bifold wooden doors, but strangely the opening of my closet measures to be 95" tall, and the current door... See more
How can I resize a screen door?
I got a very old screen door. It is made of 2x4's and put together with tongue and groove. How can I get it apart w/o tearing it up!
Need a quick temporary "door" for a hallway with a high ceiling?
I am looking to block the top of a staircase with a temporary door to keep cats out of the first floor. the problem I am having is that the ceiling is very high, 90"... See more
How do I go about putting new doors on a closet that ends at a wall?
This question has bothered me for a while. When we moved into our house the closets in the small upstairs bedrooms had cheap bypass doors on them. Needless to say, th... See more
Squeaky cabinet doors
I recently painted my kitchen cabinets and put on new hinges. They are now making an annoying squeak every time they're opened and closed. Would appreciate any advi... See more
Why not install a small air conditioner.
Most wood shops install large exhaust fans to control dust levels.
Your idea of cross ventilation would be good for adding fresh air into the space. Sometimes, two windows on adjacent walls (one on each wall) are adequate for cross ventilation. You'll gain better air control with casements than with typical "over/under"windows. You can always supplement with a larger stand fan.
If you have a power source you can get a portable air conditioner/dehumidifier. These units are on rollers and don't install into a window (but you will need to stick the vent/drainage hoses out the door).
If there isn't power then your best bet is to create passive cross ventilation.
What direction do your prevailing winds move? Add windows to opposite sides of the shed to take advantage of those breezes.
I live in Florida winds come from everywhere but an air conditioner is the obvious answer. I have power it’s hard to work on wood with out it. I’m not looking to work climate controlled just cool it off so it’s not so humid in it. I was asking for the people that know how cross ventilation works best and can advise me before I cut holes in my shed side to build a window stool.
If you originally built your shed, it will not be difficult for you to come up with pipes or air conditioning there to not breathe wood dust. My friend works in a carpentry shop. They have no air ducts, and he complains of a strong cough. They ventilate the room by creating drafts from the door and windows, which does not very effectively remove dusty air. I would rebuild the shed in another place or set up an air duct system if I were you. When we were building our workshop, we turned to AJ Mechanical. They build not only new buildings but also sheds workshops and studios.
Get an exhaust fan and put it in the window.