What kind of bedframe do I need for this headboard and footboard?
Related Discussions
How do I change wrought iron headboard to a padded headboard?
How do can I best cut a hole to make a shelf in a Ikea Malm headboard?
Ikea Hack: I want to make cubbie holes with shelves behind the headboard for storage (cell phone, tissue, book, etc). Given that the headboard is hollow what tools do... See more
How do I change a footboard into a headboard?
In a recent move I lost the headboard and siderails to a bed. I have a bed frame that I'd like to attach to the footboard. It's too low so I need to lift it up, per... See more
How do i repair a broken headboard?
As you can see one end is split the end. I need to know what products to buy.
How do I paint a brown vinyl headboard?
I'm using a nautical theme and brown just doesn't work with the decor. Any suggestions are welcome. I'm not a novice, but not a pro either. How to prep, what type pai... See more
How do I seal wood on a headboard?
I fixed up a headboard to use as the back for a bench. I painted it with spray paint that was paint/primer. It has peeled and the wood has warped and cracked in spots... See more
A metal bedframe would work.
They make metal or wood...go to a furniture place to look for correct size..am sure the bed had them at one time but you can get replacements...
Hi. There is a hole in the rails to put the rail over the brace in the original sides of this bed. I think you could use an old metal frame and put it into the brackets, but this looks like a three-quarter bed. You may have a problem finding a frame. Good luck!
If you cannot find one to fit have someone who knows how to build and use steel, make you up a set. It should not be too expensive.
This bed is very old, as in vintage 1930s to 1940s. That means you will have to shop at junk stores and flea markets. The rails are made from angle iron and have a round peg-like on the outside of the rail. That peg will fit into the slot on the headboard and footboard. Hopefully, you'll find one. Good luck and happy hunting!
If you drill a hole in the frame you can use a metal bed frame.