How do I replace the stripping around my refrigerator?
My freezer is about 6 cu ft "downright" ( vs upright) and it keeps getting frost build up faster than when it was newer. It is about 10 years old, maybe older.
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How do I fix my refrigerator with rust and bubbles?
My stainless steel refrigerator french door has bubbles under the water and ice disenser and rust. Is there ant way to fix the problem > Samsung wont help me and I ca... See more
How do I stop the pitting on my stainless steel refrigerator?
I have a 7 month old Frigidaire brand stainless steel refrigerator and I noticed pitting and rust spots numbering somewhere around 30 or 40. Is there something I can... See more
We have the same problem. My husband checked online with the make and model. The problem is, a replacement gasket is about $100.
Cheaper than a new one!
Mine is doing the same thing. I'll try Amazon or ebay for a replacement in hopes it will be cheaper!
Hi Pamela,
That is expensive!
Try going to a hardware store and see if they have generic rather then a make and model specific seal for your freezer, many carry them. You will need to measure to make sure you have the right replacement, also examine the replacement seal for cracks and tears before installing it.
Is it the gasket for sure? There’s the Defrost Timer components that go bad frequently.
Also check the Coil’s in the back of the refrigerator are not filled with dust and hair. Pull out your refrigerator and you’ll see the coils in the back and then just give them a gentle vacuuming. The seal is as mentioned above by others is easy to replace. You can tell that needs to be replaced if you’re getting mold on it as well.