Can you advise me how best to stain my deck?
My deck is about 20 yrs old but still very sturdy, no splinters, etc. It's nearly never used. I had it pressure washed yesterday because it was REALLY dirty -- the floor was nearly black. I never stained it after it was built but now want to. I have 3 questions. 1) As you see in the photo, the color is uneven. The lighter area is where the table was sitting. I'm wondering if I use a brush and OxyClean if I can make the darker areas as light as the light parts. A brush wasn't used yesterday. 2) The fellow who cleaned it suggested I use a solid color stain. I've never liked the idea of a solid color because I like natural wood and like to see the grain. But if all of the dark won't come off, then I probably have to use solid to make it look nice, right? As you see in the other photo, the vertical parts look much lighter than the rest. Any chance the floor can be made that light? 3) If the dark DOES come out, would a semi-transparent or even a transparent protectant be OK? I've read that the solid is longer lasting.
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
How can I lighten my dark stained deck, or even paint parts white?
The previous owners used an oil-based, semi-transparent, dark walnut brown stain on the deck they built. I want to lighten up the area, perhaps even paint the deck c... See more
Can you give me your opinions on whether or not to paint my fireplace?
I find the colour of my fireplace is too pink and there are some soot marks that I can't remove completely. I was thinking about dry-brushing it in white. I was all s... See more
I'd take these pics,to a stand alone paint store. See what products they recommend. They will know what works best for your project and climate.
Common laundry bleach or chlorine will effectively remove stain or dye color from wood, but will not affect the wood’s natural color.
• “Two part” A/B peroxide-based bleaches refer to sodium hydroxide (caustic soda) and hydrogen peroxide. Combined, they cause a chemical reaction that creates bleach that will blanch the stain color and can also alter the color of the wood itself.
• Oxalic acid will remove water and rust stains, plus teak stain, and can be used to lighten the graying effect of weather-exposed wood. But note: Some restorers consider oxalic acid highly toxic, since the crystal form it typically comes in can be inhaled and cause lung bleeding. Many recommend using the A/B bleach for safer practices and greater overall bleaching power.
I am sure you will get a bunch of people telling you to use Thompson's water seal. I used twice and it peeled in a year. Choose another brand if you choose to use a sealer.
The reason the solid color stain was suggested is because the wood is essentially so “old” if you will. You could try a deck cleaner/brightener on the spots, see what happens. Ask at the paint counter if you can get away with a semi-transparent but they’ll likely suggest otherwise.
My deck was discolored like yours but we also used a product that was for cleaning decks with pressure washers and it made a big difference. A few boards are a little darker but I'm Ok with it because it will all eventually gray. We are going to use an oil based clear sealer made by Cabot and Rustoleum.