How can I install a cheap counter or cover this one (pic)?
I have dark concrete counters that the previous owner diy-ed. The protective coating is peeling and chipping. And the counters are very dark and unattractive in my small kitchen. Is there some affordable way I can cover them or diy a cheap butcher block (what I would really like to have)?
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
Can I install live wood over an ugly tile kitchen countertop?
I have seen many live wood projects installed right over laminate counters. I have been dreaming of live edge butcher block counters since I was 20..I am now 60 and t... See more
How can I cover a tile countertop?
Happy New Year everyone!!I have an old grimy tile countertop that is just disgusting. I think it is very unsanitary with the grout lines and would love to find a chea... See more
You could always give them a light sand and paint them a lighter color that may help brighten up the space. There are several counter painting kits out there to choose from.
Real Butcher block isn’t that cheap and it’s glued together wood strips- which are not recommended for Food Service.
Raw meat germs, oils & grease, raw eggs - all should be completely removable from prep surfaces and they’re not with wood.
Also putting countertops on top of countertops has too many challenges: plumbing at sink no longer fits, the front edge looks silly and how do you get it to stay in place? You can’t drill through the concrete and put in 3.5” screws from underneath.
You can re-coat the concrete in lighter tones, after you sand off the remaining finish and clean it with a degreaser. I would go to a full line pro paint store and ask them for advice, on what exactly to use.
You might be able to laminate over this mess with plastic laminate, epoxy and a router. Using a router in this application, as a beginner, could be frustrating and I would hire an experienced cabinet maker or craftsman to help with the router work. P-lam comes in a thousand patterns and 5 brands.
I would go on line & order 5x7” samples of at least 10 different patterns, keeping in mind that the “finish” on the laminate changes the cost. A matte finish is much cheaper than a 3-D glossy “stone” finish on the same pattern.
If you really want the look of butcher block (which is NOT good for food areas as the previous poster noted) and really hate the concrete (which could be repaired) the least expensive route for you would be to cover them with butcher block look contact paper. It won't absorb germs and you can wash it. If it becomes damaged or you change your mind, it will have been cheap enough to pull off and throw away. This should keep you until you can afford a countertop you choose.
I've had butcher block counters for decades, you use a cutting board for food prep. And you continually seal the wood with food grade mineral oil. If properly maintained they are fine for the home..... but are not allowed in a commercial kitchens.
You could use a professional epoxy product to refinish them, but you will still need to use a cutting board to prevent nicks and cut marks. https://www.youtube.com/watch?v=IM3XrHGJL24
MARBLE CONTACT PAPER ~ Just peel & stick. Cheap & Easy for a beautiful result.
What did you end up doing? I have the same slate throughout my kitchen and hate how dark it is. I have been looking into ways to lighten it. I would love to know what you came up with.