See if one of these work for you!
Happy building! 🛠
Best way is to go to an Auction and get an Antique Table with drop down Leafs. All you do is remove the hinges, attach it to a Stained 2×4, make sure it is level and voila you got a Leafed Table fastened to the Wall.
Here is a video that may help you build a table.
Hello -this is such a clever spacing saving idea. Like a murphy bed it is a table can you open and closed when needed.
Here’s a link that might be helpful.
Hi there, this one is a cabinet and table...https://www.hometalk.com/36185740/murphy-table
Hi Mike, here's a great tutorial that will show you how you can make one - https://www.youtube.com/watch?v=Dk3piyjxMyk
You will need a large door hinge a piece of wood or a small table top you want to use and a piece of 2 by 4 for the leg to the hight of the table you want it to be .you will need another small 1 1/2 inch hinge and and a hook and eye lock with the hook that goes in the eye to lock .atach the hinge at one side to the top at the adge of the top in the middle then put the other end on the wall at the hight you want the table to sit up at.hold the table up and measure the length from under table to floor for the2 by 4 and cut if needed atach with other hinge on other end of table about 3 inches in in center you might need to put a block of wood behind the leg when it’s open to hold leg open .at the bottom of the leg you put the hook and the underside were the leg meats the table you put the eye so close table .hope it comes good .
These tables are great. Have you thought about mounting it to the wall. I saw this on Martha Stewarts site and thought how clever. https://www.marthastewart.com/273554/build-your-own-space-savers