Dryer outdoor vent cover replacement?

Purchase a new exterior vent cover of the exact same size. Remove screws in old one, and put aside. Remove old cover.

Inspect the vent to make sure no lint is clogging the vent line, which can cause fires. Clear lint as needed.

Align new vent cover, replace screws and you're done.

Make sure you also check the interior dryer vent hose at rear of dryer for lint build up.

They are really easy to replace. You can buy the replacement on Amazon or Home Depot or Lowes.

https://www.familyhandyman.com/appliance-repair/washer-and-dryer-repair/replace-a-broken-dryer-vent-cap/

Donna: maybe this link will help

https://www.homedepot.com/s/outside%2520dryer%2520vent%2520cover?NCNI-5

This may help you: https://www.youtube.com/watch?v=SWQpBZ9Rr_0

Replace a Broken Dryer Vent Cap

https://www.familyhandyman.com/appliance-repair/washer-and-dryer-repair/replace-a-broken-dryer-vent-cap/

How to Replace the Outside Cover for a Dryer Vent

https://www.hunker.com/12266457/how-to-replace-the-outside-cover-for-a-dryer-vent

Hello there,

Take it down to DIY store and see if they have a replacement, look up Vent cover on eBay or Amazon, as they may have one.

The sell new covers at Home Depot.

Hi Donna: It should just screw off, or there could be screws holding it on. Remove it and take it with you to the home improvement centre to get an exact match. They like it when you do that, it saves a lot of guessing:) Good luck

Hi Donna. Amazon, Home Depot, Lowes, Menards, Ace Hardware all sell dryer vents. Take measurements and pick one out that will fit. I like the aluminum kind they are easier to clean and last forever.

Hi! This is what I replaced mine with and it was easy.

https://smile.amazon.com/dp/B005EGQTU0/ref=cm_sw_r_apa_i_GcEVEbSZHWX70

I would still recommend calling a more experienced dryer repair specialist :) Here there is a doubt whether you can independently ensure a tight fit to your new coating? For many, it seems easy, but I, at the time, did not work out