Have concrete statue used morter to fill in protections
Have concrete statue filled popouts with morter but not working . Used Dap Webpatch floor leveler worked great how to deal concrete not Shure how to seal concrete and webpatch need more advice
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
I have a broken cement statue. What glue would I use to fix it?
The head broke off when it tipped over. I live in zone 5. It is an outside statue.
Will sun and rain change the miss color on our shingles?
We had our whole roof replaced with IKO Architectural shingles last week because of larger than golf ball size hail in early June. We used a highly rated contractor t... See more
It is not entirely clear what you are asking. Posting a picture of your concrete statue will help illustrate the problem.
Dan: maybe this info will help
https://www.buildsite.com/pdf/dap/DAP-WEBPATCH-90-Dry-Mix-Product-Data-1876111.pdf
Hello. You might wish to fill concrete statue defects with epoxy putty. It will dry gray.
Hi! Here is how to seal it:
https://www.hunker.com/12534935/how-to-seal-outdoor-statues
We had a cement statue that had a crack that just seemed to get bigger and bigger. After washing it well and allowing it to dry I applied a silicone sealant I got from Lowe's. After allowing a day for that to dry I spray painted it. Can't even see the crack now.
Hi Dan, the DAP webpatch won't need any sealing and you can use a thinned down version of the webpatch to seal the rest of your statue too.
Since all the choices you have tried did not work, I would use a silcone sealant and try painting over it.
Hi Dan, I think this video should help you put, epoxy,
https://www.youtube.com/watch?v=tnP0UgA9hAs
Yes am answering my own question . Using Dap Webpatch -90 will patch and do finish work on concrete statue BUT do not thin exterior acrelic latex it will seal concrete but will not stick to Webpatch -90
You must use something like kills because it will seal concrete and put a coating on Webpatch -90 so paint or primer will stick to . For filling small holes or scratches I am going to thin kills or same type of sealer depending on instructions on product I do not see why it can't be done ? But I have spent time and money trying to get this far but I have hopes this will work as you can see it is still a work in progress . Believe me you do not want to strip your statue or whatever it's not a fun project . Remember research is just as important as what you are working on . That's what I have learned after hours of searching the web and asking for help from everyone I thought might give me quality information . Good luck