How to repair malble?
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
How can I remove these water marks from wood tables?
My husband bought these tables and a few of them are in good condition while some have like water marks on them (not sure though). I would like to know what could I ... See more
Cat scratch pulls on a couch
I have an ivory, jacqaurd fabric couch. I recently rescued two young cats and one has claws. I came home one day to find she scratched the front of the arms. They had... See more
Hello. If it was my table I would fill it with and epoxy putty and use acrylic paint it to perfetly match. I confess epoxy putty is my favorite DIY repair product.
I believe the professional countertop people used a liquid epoxy that is custom tinted to fill. That’s how they fix the broken corners on my newly installed granite sinktop.
if it’s a very small defect you might even try superglue fill with acrylic nail powder and attempting to paint the perfect disguise.
Hi! Maybe this will help
https://www.countertopspecialty.com/marble-repair-solutions-for-chips-pits.html
https://www.youtube.com/watch?v=FctBnRl3DQQ
Use polyesther resin. Clean well with nonabrasive household cleaner. Rinse the surface well and allow it to air dry. Remove any dust and loose particles inside the chipped area by scraping the surface with a utility knife. Wipe away any loose particles with a soft rag.
Mix 1 1/2 ounces of gel coat with 10 drops of catalyst in a paper cup, using a craft stick. Stir in 1/8 teaspoon of titanium powder to strengthen the patch. Work out all the lumps from the titanium dust. This mixture will be a thick paste. If you need a smaller amount of repair mixture, mix less gel coat, catalyst and powder proportionately.
Fill the chipped area with the gel coat paste, mounding it slightly above the surface with a toothpick. The paste will flatten and shrink some as it dries. Let the paste dry at least 4 hours or overnight.
Attach a piece of 1200-grit wet-dry sandpaper to a sanding block. Wet the sandpaper slightly and lightly sand the repaired chip to smooth it down.
Attach a buffing pad to a drill. Add some automotive buffing compound to the buffing pad. Buff the with the pad to restore shine to the surface as well as to the patched area.
Hi Elizabeth, sorry you have a chip in your table. Hope this will helps you fix it. Apply epoxy glue or marble repair cement to a small brush. Brush the bonding material on the bottom and edges of the chipped piece of marble and the chipped area of the marble object. Press the chipped piece into the hole and hold firmly for the amount of time recommended by the adhesive manufacturer.
How to Repair Chipped Marble | Hunkerwww.hunker.com › ... › Interior Home Repair
i agree with Vimarhonor. Clean the chip with rubbing alcohol. use a two part epoxy putty to fill the chip. Try to shape it a close as possible. Once the putty is hard you can sand it some more to shape and smooth it out. You can use Sharpie markers or craft paint to color the repair
Wow, lots of good info here.
There is some good information here:
https://www.countertopspecialty.com/marble-repair-solutions-for-chips-pits.html
You can fill it with CA glue from a hobby shop. Use colored markers to match. or You can use Super Glue not the kind from the dollar store.
They have marble repair kits that you can buy to fix the chip.
https://amzn.to/3loyqeX
You could also contact someone who works with marble. They may not do repairs, but, may be able to give you recommendations for materials or someone who does repairs. Google your zip code with "marble" and "marble repair" and that may help. Good luck and stay safe!
You could check this out. https://marble.com/articles/how-to-do-a-countertop-repair