What is the best way to clean grout on floors?

  9 answers
  • Janet Pizaro Janet Pizaro on Apr 04, 2018

  • make a paste with baking soda, peroxide, and dish soap. Apply and scrub with a brush, rinse clean.

  • Joy30150932 Joy30150932 on Apr 04, 2018
    Have had good results with "Clorox Toilet Bowl Cleaner". I have tried a lot of other methods but none worked as well. The cleaner is a gel and so if you put a bit in the corners of four tiles and then move over the grout with a toothbrush, let sit for about 15 minutes and then scrub clean. Be sure not to use any mop you"re using to clean up, on any other flooring.

  • We use a product called "sugar soap"

  • Kim Kreitman Kim Kreitman on Apr 05, 2018
    Oxyclean +water+elbow grease(Make paste from Oxyclean powder and water and scrub with a fine brush)

  • Ginger Devlin Ginger Devlin on Apr 06, 2018
    I use Spray Nine, it gets dirt out of grout and anywhere else. I purchased it at Home Depot.

  • K K on Apr 06, 2018
    I use baking soda and hydrogen peroxide

  • Cleaning Grout with Hydrogen Peroxide, Baking Soda, and Dish Soap

    1. Make a paste.
    2. Apply the paste with a toothbrush.
    3. Let the mixture sit on the grout for 15 minutes.
    4. Rinse the grout with warm or hot water to remove all of the solution.
    5. Use a rag to wipe the grout to remove any leftover residue or dirt.

    Mop the floor with clean water.


    Making a paste with OxyClean and water. Apply let sit for 20 mins. Scrub with toothbrush. Rinse well.

    Once it's clean, SEAL!

  • Michelle Leslie Michelle Leslie on Sep 03, 2020

    Hi Nancy, You can make a thin paste of hydrogen peroxide and baking soda. Apply it to the grout and let it sit for about 10-15 minutes. Scrub with an old toothbrush and rinse clean. If the grout between the tiles has worn down too far, it may be a better idea to first re-grout and then seal. You can also buy grout pens to quickly “recolor” your grout and make them look new again.