Asked on Oct 07, 2018
Painting faded outdoor lighted halloween decorations?
+7
I have a 3 ft plastic pumpkin with a light inside that goes outside. Half of it is faded from the light in the attic hitting one side of it. I'm looking for the best paint to use that won't peel off and can hold up to the weather. It will be sitting on our porch. Thanks!
Suggested Project Book
Try Krylon fusion or Rustolem 2X spray paint. A few very light coats so the paint stays somewhat transparent.
Yes, those spray paints designed for plastic should work nicely. Don't over do the painting so the light will still shine through. Happy Halloween.
Hello, William gave you same answer as I would have because these paints hold up well on plastic.
I think you're looking for this--Krylon K02337007 'Fusion for Plastic' Pumpkin Orange Plastic Paint
https://www.amazon.com/Krylon-K02337007-Fusion-Plastic-Pumpkin/dp/B000C028C6
Krylon or Rustoleum spray paint and don't get the ones with a primer built in, it'll be too heavy and block the light.
Krylon or Rustoleum, use light coats to avoid runs.