How To Make a Deco Mesh Bubble Wreath Tutorial
The video tutorial below is for making a deco mesh bubble wreath. This wreath will be approximately 18 inches in diameter and 3 1/2 to 4 inches deep when completed. I designed it specifically to be able to fit in between 2 doors, but if you want it to be larger, you can absolutely make bigger bubbles.
Supplies used for this wreath:
1 Dollar Tree 14 inch wire frame
1 roll of 21 inch by 10 yard mesh (you'll use about half of the roll)
Ribbon (wired, 1 1/2 and/or 2 1/2 inch size) - I use at least 3 pieces per bundle, cut 10 inches each. You'll need 6 bundles.
Pipe cleaners or zip ties
Scissors
Ruler/measuring tape/ cutting mat for measuring ribbon. I used half of a pipe cleaner which is 6 inches for measuring the bubbles.
Resources for this project:
Comments
Join the conversation
-
Just the information I needed. Perfect. Thanks so much.
-
I am going to give this a try
Frequently asked questions
Have a question about this project?
Where is the sound?
Can this be done with 10 inch mesh?
Can you use 10 inch mesh ?