How do I put two rug runners together ?

Hello Kimberly,

You can use a Carpet Needle and twine and sew them together, or use Carpet Tape, or a combination of both.

You can have them sewen together by a carpet company for more permanent solution. You can try using carpet tape or heavy duty duct tape on back. It will hold a while nut under heavy use you'll have to reapply often. Will hold up longer if runners are not used over another carpet.

Here's a post that might help you - https://www.hgtv.com/design/make-and-celebrate/handmade/how-to-make-one-large-custom-area-rug-from-several-small-ones#:~:text=Lay%20several%20of%20the%20same,best%20not%20to%20use%20it.

Hi! maybe this will help

https://thedomesticwildflower.com/mend-rug-curved-needle/

Turn them over and use tape like duct tape to secure them at the seam.

On the back side, butt the two edges of the runners together and run tape the edge =s together at that seam with a strong carpet carpet tape. Even duct tape will work temporarily.

Clear duct tape on the back of the rigs should do the trick! Good luck!

Hi! This is what I have used:

https://smile.amazon.com/dp/B000BO6MIE/ref=cm_sw_r_cp_apa_i_PrA3EbJFPBKW6

You could do something like this if both pieces are woven: https://www.pinterest.com/pin/ASdMmsOqmdICVEqfyOc5lzhJGFPTHxBgimdLacXqOBFp98GcMlgosTE/

Sorry for the Pinterest link--the image is hidden in the tutorial, so I wanted to highlight it for you.

You could sew them or glue them get a piece of any material put glue all over it then place the rugs together on it ends touching so they stay together

Carpet seam tape. It is hot melt glue, done with an iron.

Use newsprint or grocery bag between the iron & the tape or the glue may get on the iron.