How to Create a Patina Background Using Paintable Wallpaper and Paint
I recently purchased a used armoire for $50. It had a huge hole in the back; probably for a TV at one time. I wanted to use it as a hutch. I removed the top doors, and created a pretty diy background.
I'm going to show you how to create a
beautiful background using paintable wallpaper and paint. This background can be used for whatever kind of project you want! So easy!
Estimated cost will fluctuate depending what you have on hand and have to purchase.
I decided particle board would be the easiest material to use to cover the hole in the back of the armoire. My husband purchased a sheet at Lowes, and cut it down to size.
we attached the plywood on the inside of the armoire using a cordless drill and screws.
we places a screw in each corner, and one in the center at both the top and bottom of the plywood.
This is a view from the outside back of the armoire. It gives you an idea of the hole we covered.
I had this roll of paintable wallpaper leftover from another project. I liked the pattern, and decided it would be great for this project.
I measured the area I planned to cover with the wallpaper. After doing so, I cut two pieces of wallpaper, one for the top and one for the bottom. I made sure to line them up, before painting to see if they matched up right.
I wanted a patina, tin-ish kind of look. To achieve this, I first applied House&Canvas chalk paint, in River Rock, to both sheets of wallpaper. This is a really pretty grey; and was perfect for this project!
You can find a discount code for House&Canvas paint on the blog below:
After I applied the grey paint, the wallpaper looked like this. I let it dry completely before applying the white paint.
in order to create a patina look, I applied a good amount of paint on my round brush. I wanted it to have a textured feel; and decided using a blotting effect would work.
I literally blotted the white paint on top of the grey. I did this all over both sheets of wallpaper.
after the paint has dried, you should have a pretty patina appearance. I used House&Canvas clear wax to seal it.
I used tacky glue to attach the wallpaper. I chose this method because I had it on hand, and it holds up well.
I really love the white patina against the wood!
Diana Deiley on May 25, 2022
I have that exact same cabinet with those old rusty hinges. (Were yours nailed in?)
I picked it up FREE because the thrift store didn't feel they could sell it and was going to trash it. (Not on my watch!) Now I will have to finish it to share the finished project with you! I'm doing a coastal them. LOVE your wallpaper idea. Thanks for sharing your beautiful project.