i'd start out the standard flat wall method, peel it off, then spray with warm water but instead of using a flat scraper I would use a rough scrub brush.
buy a scorer at home depot and score the whole wall. mix a soapy mixture of soap, fabric softener, and hot water thickest put on the whole wall. use a steamer or even an iron on steam ( you will have to keep the reservoir filled with water.) let the moisture set on the wall for a bit
I have a fireplace with 3 shelves that stick out. We plan on mounting our tv above the gas fireplace, but in order to do this we need to remove the 3 built in brick s...
See more
I want to take these off and make them much smaller. This looks like real rocks and lots of concrete. The house was built in the 70's. If I can't take it off maybe p...
See more
I want to use Citristrip to remove the crackle paint finish on my fireplace mantel and surround. I want to paint it white. It has crevices and detailing see photo). S...
See more
Try a wire brush , but wet the wallpaper down with wall paper remover or just water
i'd start out the standard flat wall method, peel it off, then spray with warm water but instead of using a flat scraper I would use a rough scrub brush.
I agree with both above, nothing like wire brush and wetting the paper. Good luck, it should be great.
buy a scorer at home depot and score the whole wall. mix a soapy mixture of soap, fabric softener, and hot water thickest put on the whole wall. use a steamer or even an iron on steam ( you will have to keep the reservoir filled with water.) let the moisture set on the wall for a bit