Refrigerator gasket

Check with the manufacturer to see if it's the correct gasket for your refrigerator.

sounds like it is too thick for your door - you can look online for your model fridge and find the gasket number on there then order that particular one to be sure it fits

Here's a post that might help https://www.cnet.com/how-to/refrigerator-door-seal-stops-working/

Are you sure you have the right gasket? Contact the manufacturer and ask the customer service hotline if you have the correct part. Have your make and model numbers ready.

I would call the manufacturer. They can often help you locate the correct part or recommend a service pro who can.

Hi Donna, it's possible the gasket is not the correct one, or that it is not completely installed properly. You can try to look up proper installation based on your brand on Youtube. also, check out this link

https://www.familyhandyman.com/project/how-to-replace-a-refrigerator-door-gasket/

Did you buy the correct size gasket? What make and model is your fridge?

I would call repair clinic (800) 269-2609 They are a tremendous help for all appliance repair

The gaskets are sized by specific manufacturer and/or model of refrigerator. Make sure the package says it’s the right type for your fridge. If not, you’ll need to find the right one.

I agree make sure it's the right one for your fridge. If it is did you install it properly.

If none of the above apply, does it have internal magnets? Does it need a required adhesive?

Make sure its the right size.the manual should tell you