Need helpful advice!?
Help with my kitchen faucet!!the sprayer part under the sink! The part under the sink keeps falling off,and won't stay attached.hoping there's some way to help keep it attached! Here's some pictures hoping it would help to know what I'm asking help for??
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
Retaining wall fell down... need some advice please!
Hi everyone! The old, stacked stone & mortar retaining wall we had in front of our house fell down after all of the rain we had in the Midwest last week. As you can s... See more
Need advice on how to stop mold spots on bathroom Ceiling.
My sister's bathroom grows mold little black spots on the ceiling. She says when they take a shower the ceiling is wet from the moisture. There is NOT a vent in the c... See more
Don't know what brand it is. There should be a clip securing the sprayer hose to the outlet tube. The picture I provided is a different brand but it shows the white securing clip. It must have fallen off.
sometimes it is a gasket or seal that needs replacing- here is more info
https://www.youtube.com/watch?v=DVTH2jyaOho
Maybe this is not what you are looking for but would plumber's tape add enough strength to keep this in place until you can do a thorough fix?
A new washer, or as Mogie suggested try plumbers tape. But from what I saw on my friends kitchen sink sprayer, there is a little clip that holds it in place. Maybe yours broke.
Try adding Teflon tape to the threads.
Contact a plumber, I tried doing this and caused a leak
Hi, it looks like it might be missing a washer or the thread has jumped. You can buy a new connector, (they're not expensive), or look for a washer that fits.
I would try plumbers tape first and if that doesn't work maybe glue it on with E6000 glue.
You're missing a part. You may need to replace the sprayer?
You might be missing a part which is why it won't stay on. Look at ones in the store to see if you can figure out which part and replace that. Or you could try Teflon plumber's tape but keep an eye on it for leaks.