I have a hand held wall paper steamer. Spray water on the film apply the steamer when it is making steam and it will peel off easy. Note careful steam very hot
I had a film on my windows that had been on the sliding door for years. I tried all sorts of things, but no luck. Finally, I used marine paint remover and covered the wet remover with plastic and taped around the entire door. I let it sit overnight. That worked. If you do use the remover, make sure to cover floor well and use protective gloves, clothing and glasses. Good luck.
I used A few drops of Dawn dish soap in a spray bottle. Spray on film then tape paper towel at top of window and run it down to bottom of window then press to wet window and spray towel to make it wet. Let it sit for a couple hours and respray as necessary to keep it damp. Film will peal off. A few stubborn spots may require scraping with a razor blade. Finish by using Windex glass cleaner.
I put the plastic shrink on my windows - now I'm wondering if it can be easily removed come spring? Maybe alcohol to loosen the tape residue? Have others put these ...
See more
My renters just moved out and a walk-thru revealed mold on the window sills/sashes/frames. They had heavy, rubber lined, curtains on all the bedroom and living room ...
See more
Does anyone know how to remove sticky residue left over from window tinting film that got left on my car windows after the film was peeled off? it is so thick it blur...
See more
I used A few drops of Dawn dish soap in a spray bottle. Spray on film then tape paper towel at top of window and run it down to bottom of window then press to wet window and spray towel to make it wet. Let it sit for a couple hours and respray as necessary to keep it damp. Film will peal off. A few stubborn spots may require scraping with a razor blade. Finish by using Windex glass cleaner.