What can I do two do with what I have to work with?
by
Charlie
+3
I have one large 4 way pallet a little bit shorter 3 way in two pallets I had the plans but need a mother. Pallet has the small semi ed square wood blocks but, to , two do the love seat for my livingvroomliving room lost the pic I printed but also it took three 4 way pallets two the same big or small
These are the two pallets I have it hard to get these type a palletsthe one on bottom is shorter but same by a footperfrrably one more ob the larger pallet.
Looks great! Are you looking to add height?
Slip pillowcases on each one and fold to the inside, cheap and easy and washable
Are the sides too big-Make bolster pillows for the sides?
Have you done an image search for pallet furniture? You might find your old picture there, or find new inspiration. There are dozens of ways to make a pallet sofa, some simple and some not, just depends on what you're looking for.
Hi Wooddk12,
If I were you , i'd center that smaller pallet on the bottom so that there is just an even amount of the big one hanging off of each side..this will strengthen it more. If I understand what you said, you have another smaller one like the one on the bottom that you could cut in half and put them on the sides as arms. OR ~ use the two smaller ones on the bottom for seating and use the big one centered in the middle of the two smaller ones as the back. Then you could get just a few pieces of wood (6 of them for strength) to use as feet to raise the whole seat up a bit. Then cover the cushions you have and voila! A beautiful piece of furniture for your home! Hope this helped and I hope I understood what you were saying. If you have any questions please feel free to comment and I'll help in anyway I can!
Hi Wooddk12,
If I were you , i'd center that smaller pallet on the bottom so that there is just an even amount of the big one hanging off of each side..this will strengthen it more. If I understand what you said, you have another smaller one like the one on the bottom that you could cut in half and put them on the sides as arms. OR ~ use the two smaller ones on the bottom for seating and use the big one centered in the middle of the two smaller ones as the back. Then you could get just a few pieces of wood (6 of them for strength) to use as feet to raise the whole seat up a bit. Then cover the cushions you have and voila! A beautiful piece of furniture for your home! Hope this helped and I hope I understood what you were saying. If you have any questions please feel free to comment and I'll help in anyway I can!