Sarah's Big Idea
Sarah's Big Idea
  • Hometalker
  • Minneapolis, MN

Easy DIY Concrete Counters: The Missing Link.

$150
4 Days
Easy

When choosing counter tops for our new kitchen, I'll be honest: CHEAP was the #1 priority. So Ardex was the clear winner. But there was one problem with all those concrete skim-coating tutorials out there: they assumed you had an EXISTING counter. What do you do when there's nothing to spread the Ardex on? I'll show you how we built our counter tops from scratch, and spent less than $150 on the whole project.
Ardex counter tops built from scratch.
Ardex counter tops built from scratch.
Back when we were discussing counter top options (almost a year ago now), very few people had heard of Ardex and faking your way into concrete counters. In fact, I found only two tutorials on the subject, but they were enough to convince me to give it a try. Chris was not so convinced. He was absolutely certain that normal particle-board counters (like the laminate ones in the tutorials) would flex, allowing the thin coating of concrete to crack. So, in order to add a little more strength and stability to the counters, I engineered this solution:
Counter top cross-section.
Counter top cross-section.
We built a "frame" out of 1x2s. Then we topped it with 1/2-inch OSB (to satisfy my need for "cheap"), and 1/2-inch cement backerboard (to satisfy Chris's need for "durable"). The final thickness of those three layers came to 1 3/4 inches, a little more than a standard counter top.
Add a trim piece around the edges.  Fancy-schmancy.
Add a trim piece around the edges. Fancy-schmancy.
We used 1x2s with a beveled edge to fancy 'em up a bit. This trim piece also creates that little overhang you usually see on counters.
Easy Ardex counters: the supplies.
Easy Ardex counters: the supplies.
Once we had a counter top to coat, we mixed up our Ardex with liquid black pigment.
Apply the Ardex in small batches.
Apply the Ardex in small batches.
Ardex sets up pretty quickly, so we found we had to work quickly and in very small batches. We mixed it thinner than the directions on the bag recommend; it seemed like a pancake-batter consistency was best for our purposes.
(Normally, you wouldn't want to mix concrete with too much water, because it seriously weakens the final product. But we're not using this in a structural application, so no biggie...and so far, we haven't had any cracks.)
Sand lightly between coats.
Sand lightly between coats.
We ended up doing three coats of Ardex, knocking down the high points between each coat. You don't need to sand too much, because each coat goes on a little smoother. After the final coat, I used 220-grit sandpaper and finished it by hand, instead of using the sander.
Then it was time to seal.
Sealing the counter tops.
Sealing the counter tops.
I chose a concrete & masonry sealer for waterproofing. Once it was fully dry, I followed it up with wax.
The final result is gorgeous glossy black counter tops, that cost less than the cheapest laminate.
easy diy concrete counters, concrete masonry, concrete countertops, countertops, diy, how to, kitchen design
easy diy concrete counters, concrete masonry, concrete countertops, countertops, diy, how to, kitchen design
easy diy concrete counters, concrete masonry, concrete countertops, countertops, diy, how to, kitchen design
For the full step-by-step, come on over to my blog: http://www.sarahsbigidea.com/2013/09/faux-crete-counters-from-scratch/. There's lots of good Q&A's in the comments section there, too.
I also did a 4-month follow-up on the durability of these counters here: http://www.sarahsbigidea.com/2014/01/to-faux-crete-or-not-to-faux-crete/.
And if you'd like to see the whole kitchen renovation (and some pretty impressive before-and-afters, if I do say so myself) check this out: http://www.sarahsbigidea.com/2014/05/the-kitchen-reveal/

Top Hometalk Projects

31 Amazing Furniture Flips You Have to See to Believe
30 Fun Way To Brighten Up Your Backyard This Summer
31 Coastal Decor Ideas Perfect For Your Home
Gardeners: Copy These 28 Stunning Ways To Display Your Plants
15 Amazing Things You Can Make With Dollar Store Gems
30 Ways To Use Old Jeans For Brilliant Craft Ideas
Browse Through These Dream Bedrooms & Find Your Favorite!
18 Fun Ways To Add Glitter To Your Home Decor
15 Genius Curtain Ideas To Instantly Upgrade Your Space
30 Fun Ways To Keep Your Home Organized
16 Ways to Showcase Your Herb Garden
20 Easy Concrete Projects You Absolutely CAN Do!
31 Creative Garden Features Perfect For Summer
30 Ways To Use Old Jeans For Brilliant Craft Ideas
29 Of The Best DIY Mirror Projects Ever Made
Sarah's Big Idea

Want more details about this and other DIY projects? Check out my blog post!

Go

Have a question about this project?

3 of 41 questions
  • Mitzi
    on Jan 12, 2019

    Can this be done on top of tile like mine?

    • Grant
      on Apr 8, 2019

      Yes I did it to my tiles that were the exact same type except in pink. Easiest way because of the grout, is to put thin layers in the grout first let that dry and then put the first top layer over the tile and grout together. I started with the grout grooves first, you bring depth to be level to the tile, this lets you have a completely smooth surface without the grout lines showing up underneath.

  • Jw
    on Jan 13, 2019

    Same as Mitzi. Can you do this on tile?

  • Lisa
    on Jan 20, 2019

    How did you prep the edges of the cut out for the under mount sink? Did you put some sort of material on the edges prior to covering with the Ardex like you did the outside edges with trim?

Join the conversation

2 of 185 comments
  • Debbie Paul Child
    on Feb 5, 2019

    I agree with Kathy I want to do a smaller area first. I dont want to screw it up. Yours is so beautiful. Great job.

  • Shelbi Gibson
    on May 9, 2019

    What's the best way to do this on existing laminate counter tops? I want the black concrete look with boxed edges.

Your comment...