How to place rings in a small closet space
Related Discussions
How to fold a fitted sheet?
Can someone tell me how to fold a fitted sheet so that it fits nicely in my linen closet?
Hod do I maximize space in a slanted small coat closet?
Help for a tiny-too-shallow-coat-closet?
I have a coat closet which is 19 1/2" D x 30" W x 90"H. The pictures show my largest frustration which is the hangers must sit sideways due to the depth of the close... See more
How can I organize all of these cans?
I would like to put my canned goods in some type of order so you can see what they are and get to them more easily. Right now, they are stacked on top of each other b... See more
Too many books! How can I organize this mess?
I need your help!!!
How to keep the blankets from sliding off our RV bed?
I have tied, pinned, and folded but NOTHING keeps the blankets from falling on the floor...there used to be an adjustable lightweight rail that went at the foot of th... See more
small s hooks might work. You could also try unbending a paper clip.
Don't know how much you want to keep the jewelry box intact , but you can take out the drawers with the tufted pockets and hang them on the wall in the closet . Or maybe you could go to Goodwill and get a cheap jewelry box for just that purpose .
They have jewelry holders at crate and barrel that hang on the door...can prob get them cheaper at amazon
If you want to use the screening, cut a cut a piece from the top and bend that out a bit.
__V____V__
|__|__|__|__| Pretend all lines are connected. Snip the top of the 2nd and 4th piece and bend out a bit to hang rings. You could also paint the entire piece and decorate with old jewels or pearls from a garage sale or gems from a dollar store.
Hope that helps.
suspend peg board on the wall or hanging frame and put short dowels into the pegboard to hold your rings
Oh, and here are some other ideas from a pinterest search:
https://www.pinterest.com/mcdoctor/project-ring-holder/?lp=true
For rings you can make your own tufted holders. Find a box that you think is a suitable size, hot glue toilet paper rolls into the box. Find a fabric that you like and cover the toilet paper rolls tucking in between the rolls as you go. You know have a tufted ring holder that matches your decor and is the size you like.
Try a bobber holder from the sewing section or a tip holder from the cake decorating section of your hobby store. If that's a no-go then, you could make your own with dowels. Cut them to about and inch long and 45' on one end and hot glue them to a backboard.
I put mine in a draw and used the black foam from jewlry boxes cut slits into them to fit rings.