Stair Railing - Hate It!
![Chubby58](https://cdn-fastly.hometalk.com/media/profile/2017/06/18/2856418_1.jpg?size=91x91)
![](https://cdn-fastly.hometalk.com/media/profile/2015/07/28/747080_1.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2020/03/21/2408602_1.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-E-FF9646.png?size=50x50)
Related Discussions
Vinyl plank flooring vs pergo (laminate)
![Lynn Turnbull](https://cdn-fastly.hometalk.com/media/profile/2016/06/24/7796677_1.jpg?size=50x50)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
![Quilter2](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-Q-F1C40F.png?size=50x50)
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
![Melissa](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-M-FF00A7.png?size=50x50)
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
![Honny GrownFolk Will](https://cdn-fastly.hometalk.com/media/profile/2017/08/21/29392702_1.jpg?size=50x50)
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
How to capp a stair railing?
![A](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-A-F1C40F.png?size=50x50)
I have a 30 year old home, with a 30 year old handrail going to my upstairs. It looks like a plastic type molded railing on top of iron rods. I can't afford to replac... See more
My wooden stair railings are spaced too far apart. How can I fix them?
![Linda Dunn](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-L-BC70FF.png?size=50x50)
I would like to add metal spindles or replace them all but want to save money. Any ideas?
Painting the oak sqiggle white will help make it dissappear. Dont know if you have kids or what your safety codes are but, i would remove every other stair spindle, then paint them black if thats the color you want. Use wood filler where you remove spindles and stain or paint to match the oak. If you want to replace with metal pick one that you know is a design that isnt short lived. Then you can buy a couple of spindles at a time till you have enough to do the replacement.
Could you perhaps paint the "squiggly" part of the stairs or the side of the stair to the white that is under it. Leave the stair tread part the way it is. That may blend it so that it isn't as noticeable. It is a bit busy with the scrolling and all the spindles.. Perhaps you could change the spindles to a stain the color of the stairs. It would be a lot of work, but shouldn't be too hard to strip the paint.
Your Staircase looks Arts & Crafts! How about making little Moulding Shelves over each Squiggly Bit where you could if wanted put a little something. and would make the Squiggly bits effectively disappear ,then if desired remove the wooden spindles and replace with Wrought Iron.
Can the squiggly things be removed? You may have to refinish underneath them, but you can also strip the spindles so it will all match.
The "squiggly" wood is ugly and distracting. Easiest would be painting the "squiggly" wood white. Eventually you can remove them, cut the squiggly part out and remount them. Do not remove any of the spindles unless you plan to to space the other two evenly. Would be a code violation and look off. Painting the spindles black is a great idea.
re the squiggles in the stars for just the molding? Can't tell from the pictures. If it's the molding which I would think because squiggles would lessen the load bearing of the stairs, I would remove the molding, add a thinner molding painted the color of the walls, remove every other spindle as suggested previously fill holes and paint the remaining spindles black. Otherwise, you might get someone that can replace just the outside square of the stairs and finish it off with like above.
Your railing/stairs can be a different colour than the floor, as long as it isn't close, then it looks off. A lot of people go with dark stain or black with medium toned or orange-y floors, or even paint them bright colours.
Here is what some other Hometalkers have done,
http://www.hometalk.com/board/8318795/keep-stairing
You could leave the risers the floor colour, and do the rest (treads, railing, spindles, squigglies )in dark stain/black .
i would paint the piece on the side white, up to the strip of moulding under the tread, then remove the center spindle on each stair...it looks like it will still meet code. You can then paint the remaining spindles black. You could also paint the strip of moulding just under the tread black to give it an even more modern look.
I kinda like the deco but maybe you would be happier if you refinished the spindles the same color as the rest of the wood. They wouldn't stand out so much and you might not notice them so much.
paint the white squiggly, the oak above it, and your spindles all the same color as your walls. This should minimize all the things you don't like.
Just change it to wrought iron spindles. DIY for a complete project for around $2000. I had 75 spindles and had to restain railings to match floors. It took me (alone) around 2 weeks (nights and weekends most were days waiting between stains to complete). I would avoid top shoes. My stairs were exactly like yours with white wooden spindles. You can see a few top shoes that had slipped down with the help of my 5 yo son. I think yours is straight forward and will definitely be easier. Check out www.stairsupplies.com.
I would strip that white squiggly off using stripper, then I would stain to match. Then I would paint the spindles gray to make them disappear using a satin paint.
You know the squiggle is just a simple design. If you trace it and include the distance between the squiggle and the end of the facing board maybe a carpenter could cut the requisite number of "squiggle fillers" and you could nail them in place and stain to match the risers and what you have on sides now. I would suggest NOT removing every other baluster. There is a reason they are spaced as they are. I would try to paint them a brown to match the other wood on the staircase. Black would just call more attention to them.