How to build a fence
Related Discussions
The most inexpensive way to build a horizontal fence?
Yet with a random length look. Pine or cedar Is also a question?Thanks so much!
How do I build a privacy fence using wood shutters?
How to build a privacy fence using wood shutters
How do you build fences without digging holes for posts?
i have very rocky Soil making digging fence hole nearly impossible. Any suggestions on how to erect a fence without drilling through rock for the posts? I don’t hav... See more
How do I build a fence with tobacco sticks?
I have thousands of 80+ year old tobacco sticks. I'd like to use them to fence my yard, particularly the back fence line (mature trees and an ancient wire fence that ... See more
Can you use fence panels to build a floating deck?
I was thinking we could use 8x6 fence panel or two for a floating deck, was just going to add extra supports.
Wood fence? First find out your local building codes and whether or not you need a permit.
See if these help!
https://www.homedepot.com/c/how_to_build_a_fence_HT_PG_BM
https://www.diynetwork.com/how-to/outdoors/structures/10-things-you-must-know-about-installing-a-fence-pictures
https://youtu.be/LrK5KHwevB4
Digging post holes is hard work! If you can, measure out post locations and hire a pro for this portion. Will be done in a matter of minutes rather than hours.
The easiest fences to build are hog wire and T posts OR Buck and pole. The T posts are easily pounded into the ground with a pounder special made for them (rent is what we did), we covered the T posts with sleeves we ordered online (T post sleeves), and simply wired the fence to the posts. It was easy! OR Buck and pole are made from posts made into an X to stand on the ground and poles nailed to it to the next X made from posts. We used 3 poles per section. NO HOLES to dig that way. Also a third is to use T posts in the ground and vinyl sleeves put over with vinyl fence sections from the home improvement store. They are also hard work but not difficult to understand how to build.