77K Views
Summertime.....And The Living is Easy - Repurposed License Plate Caddy
by
Michelle Leslie
(IC: blogger)
3 Materials
$10
2 Hours
Easy
Ahhhh we're having such beautiful weather at the moment and what better way to celebrate than with a chilled beverage of choice, especially if it comes in a home made caddy.
This little one was made using some license plates, pieces of wood and a belt handle. It fits six bottles with ease and there's enough space for some ice too.
Love that license plate. I've always dreamed of cruising down Route 66 on an old Harley and just absorbing all that history along the way Anyone else feel the same? Okay, back to the caddy. This one is super easy to make. Measure and cut the bottom and two sides for the caddy from the piece of wood.
On each of the sides make a slit in the wood that's wide enough for the belt to thread through. Stain the wood with exterior, water resistant varnish.
Put the caddy together by screwing the license plates onto the sides and adding the bottom.
Thread the belt through the slits and your done. Anyone want to join me for a cold one?
The caddy has been lined with a super secret ingredient to make sure those cold ones, stay chilled too I would love to know what you think and how you're chillin' in this gorgeous weather.
P.S. You can see loads more photos, detailed instructions and why there are only 5 bottles in the caddy over on the blog link below
Enjoyed the project?
Resources for this project:
Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Hometalk may collect a small share of sales from the links on this page.More info
Want more details about this and other DIY projects? Check out my blog post!
Published June 4th, 2018 11:32 AM
Comments
Join the conversation
2 of 53 comments
-
Maude LaFountain on Jul 25, 2019
Sweet !!! that is awesome !!! I love it great job !!!
-
-
Frequently asked questions
Have a question about this project?
Is there some type of lining to keep the ice from soaking into the wood? Great idea!!
I am going to make this but what are the dimensions of the wood? I am so ready to begin!!
Where did you get those license plates
thx
cute diy