Can I use the wrong side of my tile?
I have tile I want to use up & the color of the back side (&the texture) is perfect. The "right" side is shiny & slippery...will it stick down using regular adhesive? OR, what should I use? Thanks!
Related Discussions
Can I use peel and stick tiles on my fireplace?
I would like to use stick and peel tiles on this fireplace renovation. Has any body else used them and was it difficult? I want to use them around the black insert. T... See more
I tiled my floors and there are small gaps between tiles how can I fix
Wrong color for tile grout. How can I fix it?
Chose dark grey grout for white tile, looks awful. What can I do?
How can I use my leftover floor tile to make a round table top?
Can I cover penny tiles in my bathroom without removing them?
My bathroom floor has ceramic penny tiles, I would like to redo the floor but don't want to have to remove them. Is there anything I can cover them with?
How can I use faux brick paneling as backsplash in my kitchen?
I saw this idea in a magazine and am wanting to try it. Of course I am going to paint the brick, white I think. But I want white cabinets as well. Any thoughts? To... See more
I'm going to say probably no. The unfinished side is intended to absorb adhesive. The top side, not so much.
Having said that, it depends what you want to use the tile for. I wouldn’t try it for a floor but it might be ok on a wall where it won’t get wet. Or if you’re making a piece of art from it.
What’s your plan?
I assume it's vinyl tile. No tile absorbs adhesive. use a green kitchen scrubby to dull the shiny side. The use tile adhesive to glue it.
Dar a picture would have been useful and as Erin said a description of your project. That being said. I do not see why you can't use the wrong side up. I know on some fabrics I like the wrong side better than the right. There are sealers for porous tile. I would bring one to HD or Lowes and tell them what you want to do and ask about sealers and the correct mortar to use :) Good luck.
Sand the shiny side first. Make certain to seal your finished tile job with a good quality sealer in your desired sheen ( from mat to gloss, anything in between)
AHA! Yes sand the shiny side to dull it and roughen the surface. Use regular thinset to set the tile. Even though it is fired to set the surface glaze the back is not glazed. I agree with sealing it to play it safe. Definitely seal the grout.