Scratched like a record
How can I refinish this radio cabinet?
Hi everyone! This was a beautiful thrift store find and when I moved the front got horribly scratched :(My dear son (who scratched it moving!) tried to sand down, then stain the whole cabinet in an effort to cover the scratch but it has turned out worse than ever.Any Ideas?? Sand down to bare wood and “start over” or any cool paint techniques to try?Thank you!Carrie
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
How Can I Update This Corner Cabinet?
Everyone gave us so many amazing choices for the water pump/cistern, I thought I would ask about your experience and advice on updating this cabinet. It has held my a... See more
I would use General Finishes Gel. It’s a gel coating for the wood so you don’t have the heaviness of paint but it covers great. You can still see the wood grain even after a few coats. The wood doesn’t need to be sanded, just clean. I used it on 50 year-old kitchen cabnets and it turned out great! It would work wonders on your cool, old radio. PS, my Dad used to fix old radios.
Well you all learned to do it the incorrect way, so now let's learn to do it right.
You need to strip the piece and start over. I like Citristrip. Then I sand. Then wipe down to remove any dust and debris. Now you can paint or stain. If staining, add a few coats of poly to keep it pretty. Still use coasters or trivits before setting down a glass or cup.
Stripping/refinishing is always an option, but a lot of work, especially if you end up doing the whole piece to assure one uniform look. I would be tempted to focus on the damaged area. Can't actually tell from the photo but it looks like you have already sanded through the top layer of veneer so even if you strip you will still have a damaged area.
I would use tinted wood putty to refill/level that area,. Sand smother using a sanding block. Refill and resand until there aren't any imperfections. The first putty should be as close as possible to the original color. The secondary fill(s) can be darker. This will create a grain/natural wood like effect rather than one uniformed patch. You can blend various colors of wood filler (natural, mahogany, walnut, and possibly ebony to get a pretty good match. I like using the Elmer's filler that comes in tubes, but it needs to dry completely before sanding.
Once you you have this done, try some stains. This may do it and you can overspray with clear lacquer. If the repair is still too obvious, over spraying with a toner lacquers may help. Toner lacquer comes in varying shades.
If if all this effort fails, mask off a geometrical shape that cover the repair and paint a design.
Hope this helps.
How about something like this:
https://www.hometalk.com/diy/bedroom/furniture/fab-furniture-flipping-contest-country-chic-paint-bling-bling--17349814?
Fab Furniture Flipping Contest Country Chic Paint "Bling Bling"
Stripping is an option, but it depends on your experience. If you do not have a lot of experience, it can be frustrating.
I would suggest lightly sanding the piece using 220 grit sand paper. Paint using chalk paint in the color of our choice (I prefer Dixie Belle, but any kind will work, depends on your budget).
For the speaker section, I have replaced these with faux ceiling tiles you can buy off of Amazon. All you have to do is cut the tile to the size of the opening (like I did on this vintage stereo cabinet).
Here is the Amazon link for the faux ceiling tile https://www.amazon.com/gp/offer-listing/B004Y0VAU6/ref=dp_olp_0?ie=UTF8&condition=all
Hope this helps!
I also have an antique radio/record player that needs work to bring out it's beauty. Your question and the answers helps me too
Thank you!