How do I make table leg candle holders?
![Roxanna Bender Kline](https://cdn-fastly.hometalk.com/media/profile/2016/01/10/3861847_2.jpg?size=91x91)
by
Roxanna Bender Kline
(IC: )
![](https://cdn-fastly.hometalk.com/media/profile/2018/11/28/34441177_1.jpg?size=50x50)
![](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-E-FF9646.png?size=50x50)
![](https://cdn-fastly.hometalk.com/media/profile/2017/07/04/27247055_1.jpg?size=50x50)
+1
Answered
Related Discussions
How can I make a small table using golf clubs for the legs?
![Tom](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-T-FF8282.png?size=50x50)
How do I paint brass metal coffee table legs?
![Hea10394623](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-H-BC70FF.png?size=50x50)
(looks like brass coating)
How do I prevent table legs from making dents in my rug?
![Gwen Bedell](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-G-BC70FF.png?size=50x50)
13
See Answers
How do i make this into a vanity table??
![Moni](https://cdn-fastly.hometalk.com/media/profile/2016/10/18/10966699_1.jpg?size=50x50)
I'd like to use this small desks wood to build a vanity table instead, can someone give me ideas on how to do it??
How do I make a foggy glass table top clear?
![Jabree](https://cdn-fastly.hometalk.com/resources/imgs-responsive/avatar-letters/avatar-J-FF00A7.png?size=50x50)
I found a glass top which was dirty, cloudy and milky looking koo. Tried vinegar solution, Windex no luck. Any ideas?
15
See Answers
How do I make a wooden top for a folding table?
![Cindy Williams Jones](https://cdn-fastly.hometalk.com/media/profile/2017/07/09/27616607_1.jpg?size=50x50)
Make a wooden top for a folding table
© 2024 Hometalk.com
By Hometalk Inc.
Easy! Visit a hardware store or home improvement center and check out the turned dowel, leg section. You will most likely need a base of some sort. A piece of wood, some use clay saucers. Glue on or screw on. Then stain or paint as desired.
https://www.hometalk.com/diy/decorate/rooms/table-leg-candle-holders-28222900
https://goo.gl/images/VXMhAj
https://youtu.be/e0punk2T42o
Table Leg Candle Holders
You can drill several holes on the outside of the area you want to indent. Drill more holes all the same depth and then chisel out the remaining. Takes longer, but the dame results without the extra money. Sand smooth when the chisling is done.
Roxanna, You can find these where they sell just candles. A specialty shop. Aloha!