Why are my boards warping?
I have cedar picket fence boards purchased from Menards that were planed and nailed together to make a DIY sign to paint on. They are warping now that they are put together. I made another and tried painting to seal it immediately and same thing. Wood was not wet and set in the house several days after I'd bought it, then in the garage for a month. What am I doing wrong? Is it just because it's cedar? Or the wood is too thin? or?
Related Discussions
How to make a decorative river rock wall
Looking to DIY a rock look on a wall. Would like to find something I can sculpt my own rocks with. I have been told cement would be to heavy on a drywall backing. Do... See more
How do I build a tall heavy duty plant stand?
I have 2 majesty palm plants. Right now I've got them on 2 plant stands that have to lean against the wall for support. I'd like to build two plant stands that are ta... See more
Window box bracket without nails?
Does anyone have a way of how to hang a window box without having to screw the box or the bracket into the windowsill or the siding? Is there some way of clamping the... See more
How do I build a rustic trellis that will hide this ugly shed?
My lot backs onto the line where this unsightly, cinder-block shed sits. I need an idea to hide it. I have saved a lot of fallen walnut & maple tree branches that I'd... See more
How to make a homemade pool?
Hey everyone!I've got this outdoor area that's totally underused, and I'm itching to transform it into a refreshing paradise for the summer. Now, instead of taking th... See more
How to build a trellises for rose?
I have a climbing rose bush that I need a trellise for, no trees in the area to prop it on!
K-n-T,
Cedar generally is a very stable wood as is redwood so I don't think it's the species of wood that is the issue, unless Menards is buying bottom of the barrel boards to begin with from parts of the tree that have imperfections. When you say "warped" what exactly is happening to the boards and how are you fastening them? Are they bowed, checked, crooked, cupped, etc.? How much did you plane them down and what is now their thickness? A picture would be helpful if possible.
Probably too thin. Are you paining both sides? Only one side could cause it to warp. Also wood can feel dry and not actually be. You would be safer buying cedar planks that have been kiln dried.
Sometimes if wood is attached together too tightly, it warps. It needs room to expand.
It's weird that the planks are cupping and that it happened twice. Even at only 1/2 an inch thick, they should not automatically do that. Glueing along the grain between the boards would not cause that to happen. That is how you would glue up any multi-piece panel. Is each board cupping? Typically you would alter the end grain, one board up, next board down. Don't have them go all the same way. You could add biscuits or dowels between the boards to help strengthen and stabilize them, but you really shouldn't have to. Cupping happens when boards dry unevenly. How many boards are you gluing together? The wider the board, the more likely it will cup. Glue only two to start and add one at a time until you get the dimension you want. You could also rip the boards to a narrower width. While it's more work to glue up, they will be less likely to cup. Make sure the boards are flat when the glue is drying. You can actually use too much pressure with your clamps. I would agree with others that your boards are not as dry as you think they are. Go to an independent lumber yard and get a better quality kiln dried board. I think you will have better results. The pickets from Menards are probably among the lowest quality boards.