You can use a roller but you'd need to go horizontal so as to not leave paint in the areas between each board. Alternatively, if you're doing a large area a paint sprayer would be the best solution for getting an even coating all over without excess paint in the crevices.
It's the same technique as a wall. You can use a brush to cut in the top and bottom of each board. And then use a small roller for the flat areas. Here is a small roller: https://amzn.to/2DFvcz3
I was wondering if you could help me with something -- I have an entirely oak kitchen. I know it's the rage now to paint or gel stain cabinets. I've been considering ...
See more
The color of the wall now is gold. New shiplap will be SW Rainwashed. I do plan to use nickels to space between boards. Paint entire wall or just strips behind the ga...
See more
You can use a roller but you'd need to go horizontal so as to not leave paint in the areas between each board. Alternatively, if you're doing a large area a paint sprayer would be the best solution for getting an even coating all over without excess paint in the crevices.
It's the same technique as a wall. You can use a brush to cut in the top and bottom of each board. And then use a small roller for the flat areas. Here is a small roller: https://amzn.to/2DFvcz3
Hope this Helps! Jeremy - https://do-daddy.com
Hi Roxann, have you checked Hometalk posts for this? Here are a few ideas that might help you...
https://www.hometalk.com/search/posts?filter=paint%20shiplap
https://www.hometalk.com/diy/decorate/walls/http-www-livingthelifeofrileyblog-com-blog-faux-shiplap-yes-again-28501768
Faking It [painted Shiplap Edition]
If there's paint already on it or some kind of finish, you can likely prime it then paint it.
I just used regular interior wall paint !