How can I remove carpeting from and retread stairs?
I have carpeted stairs and want to remove carpet and retread stairs with wood plank.
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
What can I do with these spindles if I cannot remove them? Help
How do I remove caulk from concrete steps?
how do I remove caulk from concrete?
We're doing that right now! You can buy oak and maple stair treads that are attached over the ugly stairs. :)
Here's some Hometalk ideas for you!
https://www.hometalk.com/categories/rooms-spaces/staircases
Removing the carpet will unveil staples, glue and lots of prepping.
the oak stair treads are at least $27 a piece.
I have done extra prep work and am laminating mine in LVT.
It’s costing me about $8 a tread.
will post it when it’s done.
Have a sturdy staple puller, a scraper, some gloves , a utility knife, some heavy duty garbage bags and some patience, because I remember mine as messy and hard work. The padding had adhered to the wood, in mine.
Is there carpet also on the stringers that has to be removed?
If so, you will need to add the cost of refinishing or recovering these areas into the project budget.
That is project well worth doing. People think this is an expensive project but when you add the cost of the carpet with the extra they charge for installing on stairs you find out the oak treads are less expensive than new carpet.
After tearing off the carpet you will have a better idea of where you stand. Maybe you can reuse the risers at least by filling the holes and painting . The hardest thing we came across was getting the new stair treads to fit perfectly against the wall string. You would think they would all be the same but they weren't. I had to make a cardboard template for each tread. i finally got smart and made the templet ends adjustable.
You can do this and you will love the result.
We ultimately hired a local contractor to do it for us for $1,500, and it only took 4 hours start to finish. Once I added up all of the money we'd pay on new treads, risers, and other supplies, as well as all the time (weeks, with working as well) and space it would take, we decided it was worth the extra money. I wrote a whole post about how we made the decision to hire out vs. DIY and the things you should consider! You can take a look at it here if you're interested :)
Hello Kat,
Pull the carpet up by finding the starting point of the carpet either at the bottom or the top of the stairs, or maybe pull up from side of stair.