How do I get a burn mark out of an linoleum floor?
by
Sharon Flint
+6
I had a very hot Pyrex dish explode and the glass landed on my linoleum floor and put a bad burn mark in it. Does anyone know how to get it out so I don’t have to put in a whole new floor
Related Discussions
Suggested Project Book
https://homeguides.sfgate.com/fix-burnt-linoleum-31704.html
sure hope you didn't get hurt during that explosion
Your homeowner's insurance should cover that.
I once had a Pyrex dish explode, and although it did not burn my flooring, I did contact Pyrex head office, and they compensated me. You may want to try contacting them to see what their response may be to your situation.
https://www.pyrexhome.com/customer-care-center
Here's some info that may help: https://homeguides.sfgate.com/fix-burnt-linoleum-31704.html
Hi, Sharon!
If you happen to have a piece of the linoleum, the burned section can be cut out and replaced with a new piece secured with contact cement. It would have to be a tight fit to keep debris out of the seams... The above suggestions about contacting Pyrex and your homeowners insurance are also great options! I hope this helps!
Try this! https://www.youtube.com/watch?v=VNsJIe2PDXA
https://homeguides.sfgate.com/fix-burnt-linoleum-31704.html
Take a photo to the flooring department of your home improvement store and ask for their advice on products and methods to repair this so you get a good match.