How do I attach a galvanized tin to the wall?
I am using a piece of new corrugated galvanized tin as a backsplash in my kitchen. What is the best way to attach it to the sheetrock and studs? I am wondering whether I should use a decorative nail/screw or adhesive. Thank you.
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
How can I safely remove a photo that's stuck to the glass in a frame?
Occasionally I've had the problem of photos sticking to the glass inside frames. First, I'm not sure what's even causing it. I don't use any moisture when dusting the... See more
How can I make this hidden door more hidden and less hideous?
I have a hidden door though it doesn't look so hidden at the moment and I like the appeal of a hidden door. We do need to use the door, but not often. This is in a b... See more
How can we camouflage the siding in our add-on room?
We live in a mobile and have an add-on room where a covered patio used to be. Now it's part of our living space and we would like to cover or camouflage the exposed a... See more
Would someone tell me what I'm doing wrong with command strips?
First one fell off in the bathroom - okay, maybe moisture. In the kitchen - fridge, inside cabinets and on tile walls. All fall off. Everyone else seems to love them!... See more
How to hide this circuit breaker?
Entry way update. I bought a co-op and started renovating but am stumped as what to do with the entryway. The circuit breaker box is smack in the middle how the heck ... See more
I would think that a very few well-placed screws in the areas where the corrugated portion meets the wall would adhere it well. I bet your backsplash will look awesome!
I would use screws rather than adhesive. The reason why is take if you ever want to take the tin down using an adhesive would make the tin harder to remove and you would probably destroy the sheetrock behind the tin during removal. You could attach your tin with screws into the studs and then add "dummy" screws to make it look like everything is evenly placed. The screws in the studs will be what is actually holding the tin to the wall and the decorative "dummy" screws will only go into the sheetrock but that is ok. Sometime it is those little things that bother the eye! I get it! You could also use nails if you drilled the holes in the tin first. I think over time you will not even see the screws or pay any attention to them!
Love your answer GK!
Hi. This article may help. https://homeguides.sfgate.com/use-corrugated-tin-backsplash-kitchen-36089.html
As corrugated tin is relatively light, standard construction adhesive is usually strong enough to attach the tin to the wall securely with the help of some decorative nails. Latex-based products are typically best, as they’re easy to wipe off the wall if there’s any excess during installation. Always apply the adhesive evenly to the back of the tin sheet, hold the tin to the wall firmly for a few minutes until it begins to set, and tape adjoining pieces with heavy-duty painter’s tape while installing them. This will ensure everything stays put and even while the adhesive dries.
To anchor the tin more firmly to the wall, use nails with decorative heads along the top, bottom, and sides of the backsplash. This will not only ensure the tin stays on the wall, but also add a designer touch.
Depending on the type and color of the corrugated tin you use, you can edge the backsplash in a number of ways. For a play on texture, you can use bull nose tile. Measure the areas to be trimmed and do a dry layout on the wall with the tile to determine the best arrangement. Cut any tiles to size with a tile saw, and apply an even layer of thinset to the wall, using the notched end of a trowel. Press each tile firmly into the thin set, wiping away any excess with a damp sponge, and once everything is installed, let it dry for 24 hours. Apply grout over the tile and then wipe away the excess with a sponge, ensuring you thoroughly clean any grout that gets onto the tin.
You can also use the same color and type of wood as your cabinets to trim all the exposed edges, cutting the trim to size and securing it to the wall with finishing nails. To play off the metal theme, use aluminum trim in a matching or complementary color, attaching it to the wall using the same adhesive you used for the corrugated tin.
I agree with screws, or if you're really not certain you'd like it, you could use the hanging strips from 3M before actually screwing it into the wall.
If you do attempt to install the tin against the wall, be sure to use screws that have been specially treated to be rust resistant.
Otherwise, in a very short time, simply due to closeness to water, and moisture in the kitchen, the screws will become rusty, and the rust will continue to grow behind the screws and the panel. This situation might easily result in a huge mess which will be troublesome and costly to repair.
I have galvanized metal on the front of my peninsula. It's been on for over one and a half years, and in spite of getting bumped and kicked when someone eats at the counter (I have barstools there) the screws have held tight. Just make sure they go into wood or you use a wall anchor.
Here's a post that might help - https://www.remodelaholic.com/diy-corrugated-tin-wall-tutorial/