How do I cover up an ugly section of dark paneling?
The section in this bedroom is 3 ft. wide by 4 ft. tall. Lightweight item I had mounted has come down at least twice with Command strips. There is sort of a blue and green "theme" to this room. Help!
Related Discussions
Blackout curtains behind vertical blinds
I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
How to make a balloon garland?
Does anyone know how to make a balloon garland or a balloon arch?
How do I cover up a bad mudding & taping job?
Our basement was just drywalled but the person doing the mudding and taping did a real bad job. They did not sand it smooth so you can see where every drywall sheet i... See more
How do I cover up this ugly electrical panel??
This guest room is in our walkout basement so the backyard can be seen out the windows. The electrical panel was installed near the top of the wall without a finished... See more
How can I update paneling in my home?
Hi hi! I’m about to close on a big mid century home with lots of wood paneling. It’s an awesome old house, and was built by a builder for his own family, so the o... See more
How can I update my tongue and groove wood paneling?
I hate to loose the integrity of the wood...Any ideas? Maybe lighten it, but If worse comes to worse, I will paint it HELP
How do I cover up old molly bolt holes?
I need to paint my bathroom and there are 8-10 molly bolt holes that were previously painted over. Is there a way to cover, hide, or fix these holes in the wall?
Can you prime and paint the dark paneling to match the rest of the walls? That should be a fairly easy job Glenna. If your Command strips are not holding what you have hung you may need to make sure that the Command strips you are using are rated for the weight of what you are hanging. Not all Command strips hold the same weight. Each package will tell you what weight those particular Command strips will hold. You also have to make sure that when you position the piece on the wall and the Command hook that you give it the proper time to adhere to the wall. Some people put up a Command product and then immediately hang things only to have things fall down shortly thereafter. Good Luck!
Hi Glenna, do you have a picture of the room or panelling? It might help so that we can see what it looks like and help out. Have you tried painting it?
Painting is the best and easiest solution
Make sure the paneling is clean and dry. Prime with a good stain blocking primer like Kilz. Then paint like painting regular walls. Acrilyc latex paint will work. If the paneling has grooves you can fill them with non shrink drywall patching compound. Just put on enough to fill the grooves. Let it dry overnight. Next day use a damp sponge to smooth the patch. Then prime and paint.
You can also wallpaper fabric on it with liquid starch. Just soak the fabric in the starch, wring out well and apply to the paneling. It will peel right off with no damage in the future. Perfect for renters
Yes a picture would be very helpful so we can see exactly what you are working with.
I'd love to see a picture when you get a chance.
Glenna...I would clean good then use Kilz primer then pick the paint color. Usually a couple coats will cover...I used a brush on the grooves and rolled the rest
Hi! Paneling is easy to paint. Wipe any dust, etc. Fill in any holes and grooves with spackle. Lightly sand until surface is level. Wipe down with damp microfiber cloth to remove sanding dust. Seal with Kilz (you can get it tinted to match the color you are painting the wall) and paint. An alternative is wallpaper, although I would fill in the grooves first.
Here's a post that might help - https://www.housebeautiful.com/design-inspiration/g2624/wood-paneling-makeovers/
Hi Glenna,
I fully agree with Cynthia. We did that in our home because many of the rooms had a lot of knotty pine. When our neighborhood was originally built all of the houses had knotty pine kitchens (all walls and cabinets) plus knotty pine in almost every room. We remodeled the kitchen but painted the other knotty pine walls to fit better in our home. The biggest thing to remember (in my opinion) is to make sure to sand the walls until they are really smooth after using the spackle or wood putty. A tiny "ridge" left behind will show in the texture after the wall is painted. Also make sure to use Kilz or another top brand. Do not leave out the primer. The natural oils in the wood will seep through regular paint and the wall will always have streaks showing. I hope these little tips help. Wishing you the best.
Just regular fabric. What I meant is to apply it like wallpaper.
Hello Glenda,
Use double sided tape and a picture frame (without glass) Then paint that area to suit your room or stick in a print of some kind !