What kind of adhesive is that?
Hello,
I have big question on this video.
on this video clip, how come they can paste and peel strips again and again without damage base paper or the strip materials? If strips are already adhesived on back ,like sticker, why those unused strips piled up do not stick with each other?
Thank you
Related Discussions
What is the best adhesive for gluing porcelain to porcelain?
What is the best adhesive for gluing porcelain to porcelain? I used E6000 in an attempt to glue a porcelain cup to a porcelain saucer with zero success.
What adhesive would be best to adhere metal to wood and to canvas?
I am making a project where I can glue small metal parts to wood and to a painter's canvas.I want the adhesive to be strong enough so that the metal parts stay on for... See more
What adhesive is best gluing two concrete slabs together?
I have a short sidewalk 15' project where .. I want to use large concrete pavers.. and I want the look of a floating paver. I don't want to put down gravel and tamp ... See more
What adhesive to use?
I'm in the process of updating a 70's bathroom. It has the large bare/plain mirrors attached to the walls that was so popular during that era. I want to 'frame' the m... See more
What adhesive works with vinyl flooring?
I want to plank a wall with vinyl floor planks.However, I cannot make the planks stay on the wall. I can't nail because that would mar the planks. Is there a solution... See more
You would have to ask this question to the original presenter. This is the general forum and the person who can answer this question is not likely to see it here. Please go to the presentation and check the selection for questions.
Can you tell us which video you are referring to Stanchen. If you are not sure where to find it we could find it for you and answer your question.
I agree, you will need to ask on the original video, but it sounds like it may be double-sided tape. The liner on one side would keep it from sticking together.
Hi there, in the search box you may be able to find the video/project here on Hometalk. The search is in the left upper hand corner, hope that helps!
The strips are adhesive backed. The white paper is peeled off to stick them on the substrate. They don't stick well until they are rubbed down by hand. The piled strips still have the paper on them. It's peeled off when a color and grain strip is chosen to be put down. I would assume that when everything is down they would go over the whole surface with a rubber J roller to make sure there is a good bond. Similar to gluing laminate.