How do i fix it?
Just finished spraying my shower pan with Homax unfortunatly it came out rough and dull...did all the cleaning. But due to poor lighting I could not see how i was spraying all the time.
How do i fix the roughness and dull finish?
Thank you
Related Discussions
How to get rid of mice?
We seem to have some unwelcome Mickeys and Minnies in our house. What is the best way to get rid of them?
How to remove popcorn ceiling with asbestos?
I want to remove my popcorn ceiling, but it has asbestos in it. How do I go about this safely?
How to caulk baseboard gaps?
How do I fill gaps at baseboard, should I caulk? If so, does anyone know how to caulk baseboards?
How to fix squeaky hardwood floors?
How do I fix squeaky hardwood floors?
anything I can do to fix this leak?
We are having our first major rainstorm of the season and when I recently checked the basement, the spots that have leaked before are leaking again. They are where th... See more
I would try another coat after some light sanding. Sometimes all it takes is a little more time and application.
Lightly sand and apply another coat. You can use fine steel wool for the sanding. Then wipe so that you have a clean surface.
Do not use steel wool, for fear of splinters. Use a light sanding sponge. and spray another coat, it may take more than 2 so be patient
Agreed, do not use steel wool as Dee pointed out, metal splinters are no fun. A light sanding sponge should do the trick to make the surface ready for another light coat or more to do the job.
lightly sand and apply another coat.
Hi! I read the directions on the Homax website. They recommend going over drips and sags with a clean paint brush dipped in isopropyl alcohol, then letting it dry for 3 hours before applying another coat. I don't know for sure, but if additional light was set up, you might be able to catch anything before it hardens. From the website, they also recommend very light coats. I hope you are wearing gloves, goggles and a respirator after reading the warnings and chemicals. Good luck and stay safe!
Thank you all....
Repeat thin coats, until it feels smooth.