Is it necessary to sand a white metal door prior to priming and then painting a dark color
-
3po3 on Aug 12, 2012I'm not sure it's absolutely necessary, but it should make painting easier if you make a little bit of a rough surface to help the paint adhere. But light hand-sanding should do the trick. I think a power sander could take it too far.Helpful Reply
-
-
Michael G on Aug 12, 2012Thanks SteveHelpful Reply
-
-
Peace Painting Co., Inc. on Aug 13, 2012That's right, it's safe to glance over it with a sanding sponge. A rule of thumb is do not paint over a shiny surface without dulling it. CPHelpful Reply
-
-
Woodbridge Environmental Tiptophouse.com on Aug 14, 2012If the door is metal and insulated. Be sure that the door does not face the sun during the hot period of the day. It will warp if painted a dark color. Also dark doors that have storm doors placed in front will also warp if made out of metal. This will void any warranties on the door if any are still left. As far as sanding,, be sure to wipe the door really well with tack cloth and use paint and primer for metal. Most likely if the door was never painted the white door was simply a prime color finish. As your supposed to paint the door once you purchase it. Most folks do not do this as the primer always looks pretty good when new.Helpful Reply
-
-
Paint-N-Plus on Aug 29, 2012I agree w/ Peace rub over it w/ a sanding pad.Something else to keep in mind.if this is in the heat try to get it done in the coolest part of the day.This helps with the edges drying to fast,before you finish.Make sure the sun is not on your door or the paint will almost dry right away.Good LuckHelpful Reply
-
-
Grainne on Aug 20, 2015I spray painted a metal door black. Here's what I learned. Wipe door down with vin ear first. Use metal primer, let dry over 24 hours. Wipe with tack cloth and paint. Good luck. I do not want to tell you how many times I had to redo door until I got these tips from my father in law.Helpful Reply
-
Related Discussions
How can I remove labels from coffee cans so I can upcycle them?
How can i upcycle rigid foam packing blocks?
how can i upcycle rigid foam packing blocks?
How do I get rid of moles, voles and chipmunks?
They dig holes, have tunnels and throw dirt all over. how can I get rid of chipmunks, voles, and moles with natural easy to find ingredients?
How to remove Behr Deckover?
We used Bher Deck over about 5 years ago. It is peeling and fading in places. We have tried to remove it. It is almost impossible. HELP!
What are your thoughts on painted brick: yay or nay?
Painting bricks can completely transform the appearance of a home, giving it a fresh, modern look or adding a pop of color to an otherwise plain facade.On the other h... See more
Getting rid of burdock-Anyone know a non toxic way to get rid of them?
i am clearing an area to plant a butterfly/bee wild flower garden. The area is full of burdock and the soil is hard packed clay. I have been digging the burdock out... See more