What is the best glue/adhesive for adhering plastic to metal?




Need to glue a round plastic reflector to a metal mailbox. Gorilla Glue didn’t work.
Related Discussions
Blackout curtains behind vertical blinds

I have two 6' patio doors, and I want to add blackout curtains to keep the sun/cold out. What is the best way to hang them, and what can I use to push the curtains ba... See more
What is the best glue for gluing rocks onto plastic

I have been trying to make fairy houses out of plastic flower pots for outside but can't seem to find glue that will work. I bought rocks from a craft store and trie... See more
What glue do I use to adhere Velcro to a plastic ball?

I want to stick velcro to to a plastic ball. What glue should I use and what should I absolutely not? I will freak if it eats a hole in my project!
What adhesive would be best to adhere metal to wood and to canvas?

I am making a project where I can glue small metal parts to wood and to a painter's canvas.I want the adhesive to be strong enough so that the metal parts stay on for... See more
I need a food safe glue that will bond metal with metal. What's best?

I just need about a 9" line of it.
What is the best adhesive for gluing porcelain to porcelain?

What is the best adhesive for gluing porcelain to porcelain? I used E6000 in an attempt to glue a porcelain cup to a porcelain saucer with zero success.
What is the BEST "glue or caulk" for metal bottles caps to wood?

I want to make plaque that has a design made from different colored metal beer bottle caps on some reclaimed pallet wood, and I don't want to see any glue. Most of t... See more
3M has a double sided tape that's used for automotive decals etc. It should work for you! :)
Georgia....Try E6000...it just might work! Good luck
E-6100, with all the strength and adhesive properties of E-6000, is the thicker non-sag formulation that won't slump or run, allowing for maximum control. This translucent-clear adhesive is ideal for overhead and vertical use.
Georgia: I like the GEL Super Glue by Gorilla... I have used it on metal for metal reflectors!
Hi ! Use E6000 ! It is a great heavy duty glue ! You can find it in craft stores , Wal-Mart., even some grocery stores .
Cyanoacrylate (Super Glue).
I would use 2-oart epoxy glue for an exterior project, It comes in 2 syringes for the 2 parts, and mix on a piece of cardboard with a popsicle stick or a chop stick, then apply to the back of the reflector. Put some painters tape over it once stuck to the mailbox to give it time to cure.
This glue works well for metal/plastic: https://amzn.to/36y1Ga8
Hope this Helps! Jeremy - https://do-daddy.com
Home Depot sells reflector tape just peel and stick
How about putting a magnet on it
I use E6000 on everything. It holds very well.