3D Blossom Tree Rustic Wall Art

The start of my weeping willow

The plywood was in good con its 19yold. This bit i saved.

I knew it would be handy at some point. Cleaning it before i started to play round with the thicker branches to make a trunk.

Making my trunk.

I scraped the trunk branches with a sharp knife.

Glueing them with the hotgun i glue'd 3 branches together for a thicker look.

To resemble a trunk look.

Adding. My branches an bloom

A weeping willow as lovley long hanging branches.

These branches were working well as the little bits that held pinecones.

Were still strong.

I glued it all down. Makeing sure it was very secure.

*If using a hot glue gun be careful.

So my weeping willow as bloomed. Ha..

The fake flower rip the heads of an separate the petels. Shown below.

Rip up the flower

These were easy to add as they had holes in from where i separated them. "Again easy job..

I just started to add the petels to the bits left on the branches. Where pinecones had been.

Again using my gluegun to secure the petels. If i couldn't find a bit to add a petel to i just glued it to the branch. Untill i used my petels up.

Looks lovley i think.

For a peice of old plywood. I do like this as rustic leaning pic. I never thought it would turn out this pretty. Looks 3D evan

So this is my blooming weeping willow i do like how this turned out. Fits my wooden deco. An it was free an made by me.

The leaning weeping willow picture. I will find a place to hang this.

Looks cute. From twigs an a flower.

The weeping willow is my fave tree. I like how this turned out. So pleased i kept my pinecone twigs from winter.

It as made a perfect addition to my spring rustic deco. Plus again was free. Happy hometalking