DIY PVC Birdhouses

Dan Berg
by Dan Berg
30 Minutes
How to easily build PVC Birdhouses. Easy DIY project.
Check out this short how to video to see how easy htis PVC birdhouse is to built.
I used a circular saw to cut an angle on a piece of 4 inch PVC

Cut a circle out of scrap trex and made additional holes for the birdhouse door and perch.
The trex and perch were siliconed in place
A similar round disc was used to create the back wall of the birdhouse. Both could be made from PVC boards, Trex or wood.
Finished product is weather resistant and maintenance free
Frequently asked questions
Have a question about this project?
3 of 5 questions
  • Mizar Mizar on Jun 12, 2017

    There are no drain holes or holes for ventilation. That PVC will get HOT!

  • Catherine Catherine on Jun 30, 2018

    What is trex?

  • Diane Diane on Jun 30, 2018

    Wll the glue be harmful to the birds?

Join the conversation
2 of 35 comments
  • Carmel M Ooi Carmel M Ooi on Jul 05, 2018

    Love this project. Great idea. I've never seen anyone use a circular saw that wasn't fixed to a work bench before. I was holding my breath hoping you wouldn't cut yourself badly.

  • Iris Iris on Sep 16, 2018

    If you left off the perch you co u great for bluebird