<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=996690293685739&ev=PageView&noscript=1" />

Is Your Dryer Taking Too Long to Dry Clothes?

Have you noticed recently that your dryer is just not drying your clothing as quickly as it used to? It may not mean that you need a brand new unit, but just need to give your current model a tune-up. You should inspect your dryer once a year to make sure everything is running efficiently! This could save you money over time.

Note: To minimize the possibility of electric shock, unplug the dryer from the power supply before attempting any maintenance or cleaning.

Clean the Lint Trap as you probably already know, the lint trap at the front of your machine should be cleaned after each use. You should also wash the filter with warmy soapy water every once in a while.

Check the Vents - The condition and flow of your dryer’s venting hose is the most important factor of your machine’s efficiency. If the air flow is impeded or obstructed in any way it could significantly slow down drying time. The machine may have shifted over time due to use, so check to make sure that the dryer isn’t pushed too close to the wall so that it’s pinching the hose. Also check that the inside of the vent is free of lint buildup and that the opening from the outside wall damper is not obstructed by plants or other objects. It’s recommended that you clean the duct work at least once a year.

Did You Trip a Fuse?
Many household dryers use two fuses or circuit breakers, so check to see if one is tripped. One may be powering the dryer tumble, but the tripped circuit may not be supplying heat.

Check the Drum Belt - The drum belt is what makes the dryer drum rotate. Turn on your dryer and open the door to see if it’s revolving. If it isn’t, then the drum belt is slipping/broken or the idler pulley may be frozen.

Sort Your Clothing - The resolution to your dryer problem may be the amount and type of clothes you may be loading into the machine. Here are a few extra things to keep in mind:
-Make sure that you are using the correct washer settings and that the spin cycle is removing enough water before you place your laundry into the dryer.
-Don’t try to combine loads in the dryer and overload the machine.
-Don’t put too few items in, either, or the clothing may not tumble correctly and instead just shift to the back.Don’t put heavy items, like towels, in with lightweight items.
-To see how GE recommends you sort clothing on laundry say, see their article on their web page.

If Those Don’t Work or You Need Repairs…If the above methods don’t work to dry your clothes, the heating element or thermostat may be to blame. Call in a serviceman to take a look. If you purchased your dryer at P.C. Richard & Son, we can come and inspect the unit. For more about product service and repair, check our website!

Ask the creator about this project

  • Alexandra Arena
    Alexandra Arena Forest Hills, NY
    on Sep 3, 2013

    Thanks for the excellent tips & checklist, @P.C. Richard & Son!

  • P.C. Richard & Son
    P.C. Richard & Son Farmingdale, NY
    on Sep 3, 2013

    You are very welcome, thank you for taking the time to read our post :)

  • Sherrie
    Sherrie Nixa, MO
    on Sep 3, 2013

    if your clothes are wet hot and not drying I it means that the air flow is stopped up with either lint or the hose is crinkled. If its not heating but turning around before you call a repairman check your 220 voltage or switch. Rinse your trap and clean it with hot water every week if you use dryer sheets. This helps keep off the softener and allows free flowing air.

  • Linda L
    Linda L Vassar, MI
    on Sep 4, 2013

    you should also consider if your clothes are a little wetter than usual as they come out of the washer. If you washer transmission is going it is a gradual decline and it doesn't spin as fast.

  • Henry Hofmeister
    Henry Hofmeister
    on Sep 4, 2013

    thermostat is most likely the problem. most people know how to load and sigh when the overload jeans, blankets or towels. If your dryer is on two electrical circuits then you need to have that put on a double pole. That is very dangerous and not right if one blows and the other shorts.

Inspired? Will you try this project? Let the author know!