How do I change my kitchen fluorescent fixtures to the pot lights ?
My Kitchen was built in l987, when florescent fixtures were popular. I would like to change the ceiling and have the "pot lights" throughout the kitchen . Where do we start? I know we have to tear out the ceiling, and we are very DIY savvy, but this is new for us! Our whole neighborhood is waiting to see what happens to us before they will even think about changing theirs! We're the Grandparents of the neighborhood, trying to teach the younger generation, "Yes, you can do it! We did!"
Just finished replacing the Brick Fireplace with a White Marble looking ceramic tile.
The neighbors are amazed how I spent 8 hours figuring how to get a vein, and how
I remember what freshly cut marble kinda looked like. They're surprised that it is
ceramic and not real Marble! We are looking forward to this next project! Only 3 more rooms to go before our house is Modern!!!
Related Discussions
How to replace a toilet seat?
I need advice on how to replace a toilet seat, please. What do I need to know when looking for a new one?
Rechargeable. Chandelier Bulb
Does anyone know if there is such a thing as a rechargeable chandelier light bulb? I know they make standard looking rechargeable bulbs, but I am looking for a recha... See more
How can I update this 30 year-old hanging light?
The ugly light is hanging in my dining room. Please help. Thank you!
Lighting of Decorative Village question
I have this small Thomas Kincaid village that I love. It came with each house having a Christmas tree bulb on a long cord, so there's this heavy cord running out of ... See more
Is there a way to warm up the color of LED lights?
How can I make LED disc lights a warmer color? They are too white, I want them to have a more yellow warm glow.Best LED light!Looking for a warm white LED light this... See more
How to evenly backlight circular stained glass window hanging?
I’m struggling for a good solution to backlight a circular stained glass window hanging. I read posts on a forum that suggested LED light strips. The result is no g... See more
How can I hang a light from my ceiling w/o wiring or drilling holes?
I live in an apartment and I can't drill holes in my ceiling or do any kind of renovation. So how can I hang a light or a light fixture from my ceiling without doing ... See more
Hi there, they make "After construction" pot lights. Depending on your ceiling you should be able to cut your holes where you want the cans to go and run your wire to them by fishing it around :) Kinda tedious but WAY less expensive than replacing your entire ceiling. You should be able to use the wire from your florescent to get to each of the cans/pots/recessed lights.
I found an article that might help you - https://recessedlighting.com/kitchen-lights/
Recessed lighting is ok if you don't have a ceiling fan too. Keep that in mind if you want to put one of them in as well. Some nice ceiling mount lights will give you plenty of light if you need it. Also undercabinet lighting is great.
You do not necessarily need to as you say, 'tear out the ceiling' to install pot lights. You will need to at some point though go up into the attic and crawl around to fish the wires through. This is physically not easy, as many attics are nasty- hot, dark, and dirty. A mask and protective clothing will most likely need to be worn.
The older style pot lights were more of a can or tube style. They required vertical depth to install and due to the heat generated from the enclosed bulb, thick insulation was necessary. The housings were bulky, heavy, and sturdy hardware was needed to anchor them into the ceiling lumber.
The newer integrated LED style are more of a flat puck design. These are thin, so can be installed fairly easily - pushing them up from below. AS LED lights do not give off heat, this style does not need any insulation. Housings and clips vary according to brand, but as all are very lightweight, they do not require robust hardware to attach.
Purchase fixtures with the highest lumens that your budget can afford. If a dimmer switch is installed on the wall, amount and intensity can be varied according to time of day, season, and activity in the kitchen. It is also sensible to have the entire bank of lights on two different control switches, such as the one over the doorway, sink, etc. on one switch, and the rest on another. Plan it out to whatever might suit your needs better than having to turn all the lights on every time you need any light.
Awesome Info! Our bathroom is right above our kitchen so LED's it is! Thank you so much for your time, I truly appreciate it! ellen