How do I stain a concrete patio?
We are building a new home & have a walk-out concrete patio which I would like to make look like rock in rust colored tones. How do you stain the concrete for a variegated effect?
Related Discussions
Vinyl plank flooring vs pergo (laminate)
I currently have stinky dirty carpeting in my living room and I want to replace it with a durable flooring that can stand up to dogs and kids.
How to remove popcorn ceiling that has been painted?
Does having a paint over a popcorn ceiling change how I'd remove the popcorn ceiling?
How to apply peel and stick wallpaper?
I want to spruce up my walls with peel-and-stick wallpaper. Has anyone used this before and can advise me as to how to apply it properly?
How to stain wood floor?
I've heard staining is a good technique for updating floors. So how do I stain my wood floor?
What can I do to my concrete patio that gets no sun and molds?
(Don’t mind the message😁 )Been thinking of options so it doesn’t need power washed every month
Start of suggested clipEnd of suggested clip How to Acid Stain Concrete | DIY Acid Stained Concrete Patio - YouTubehttps://www.youtube.com/watch?v=ZSlzelQYEOU
Ideas from other Hometalkers.
https://www.hometalk.com/search/posts?filter=stain%20concrete
Hi, Jim. One way is to paint the patio a light-to-medium beige first. Then use stencils that are shaped somewhat pentagonal stones. You get these at home improvement stores or online. Decide how many colors of brown you want to use, from tan to dark brown. Use a pencil to mark each of the first stones by the color you want them, trying not to get two of the same color next to each other. You can draw the shapes with pencil, or paint inside the stencil. When the stencil is lifted, paint now. Then let the paint dry at least a day. The next day, you will need a brown that’s different from the primer, plus either gray or brown paint to be your “grout”. May sure the previous paint if completely dry. To make shadows on the rocks, use the non-primer color. Paint the sides roughly parallel to the patio door with that paint about an jnch wide, as well as the sides roughly parallel to EITHER the rising or setting sun. No stone should have more than two sides trimmed with that paint., and some might have only one. Then paint the grout lines, a little narrower than the primer showing between the stones. To add even more detail, you can paint some light lines on some of the stones, and spatter some paint on some. When you get through with all the details and trim, let everything dry at least one day. Don’t cheat! Then you can seal your artwork after you write your name on one stone. Best wishes, and please take photos and post on Hometalk. ☺️
Hand a friend do this with outdoor paint and took a sponge mop to make the brick image and let it dry.....looked real Can make the spaces as wide as you want or as close as you want
Your weLcome.....good luck.....show pictures when done :)